SaVaGeEaRL wrote on 05/27/12 at 06:16:28:I Have also noticed that the decompression solenoid cable is not moving when Pull the clutch cable, in neutral, and hit the starter button.(
Take off the tank and make sure the cable is seated correctly.
If the piston is in compression and the decomp is not activating, it can stall the starter. You can do it by hand but pretty tough.
Here's a quick test, put it in a high gear and bump the bike forward until you can turn the decomp lever, this indicates that you're in the exhaust stroke. Now try to start it. If you can, then it's the decomp adjustment or operation. as you noted, it's not moving.