WD
Serious Thumper 2005 No Login
Offline
Professional "scooter trash".
Posts: 5207
Rosemark TN
Gender:
|
If you had stock flat bars the cables are too short. If you had stock buckhorns you should have no problems with 8" TOTAL rise. If you have 8" bars on the later model drag bar risers, buy new cables, some light wire (stock harness is pathetically light) and some heat shrink butt connectors. Extending the harness is easy.
Always try your local independent shop for cables and hoses. My bike with 15" apehangers runs a Harley throttle cable, Kawasaki clutch cable and generic catalog sourced braided stainless front brake line. I extended the wiring myself, takes 1/2 an hour.
Or cheat and get hold of Lancer from this board. Barnett cable/hose supplier.
|