so while i was making the muffler for my 07 s40 i decided to remove the air box and add a cone filter, swap the petcock for a raptor petcock and rejet.

well i had to unplug some connections when i was trying to clean up some of the wiring and now i have a plug that doesn't have a home and the bike won't start.

it's a two wire plug with green and orange wires. the male end is near the frame by the fender. no clue where the female end is.

i searched and found that the wires go to the generator or ignitor, i think. one diagram was in german so i'm not really sure what it said.

i've traced the wires everywhere and can't seem to find where this plug goes. any help would be greatly appreciated

will do!
thanks for the heads up.

i've got the whole middle of the bike torn apart looking for this darn plug.

thanks for the starting point, now it's back out to keep looking and try not to break anything, hahaha

hidden inside some other wires that i had zip tied out of the way.


I always go straight to where Ive been messing with stuff if I develop a new problem while working on somethng,