Routy
Serious Thumper
![* *](/yabb2.2/Templates/Forum/new/starsilver.gif) ![* *](/yabb2.2/Templates/Forum/new/starsilver.gif) ![* *](/yabb2.2/Templates/Forum/new/starsilver.gif) ![* *](/yabb2.2/Templates/Forum/new/starsilver.gif)
Offline
![](http://www.andruschak.net/Avatars/Routy.gif)
SuzukiSavage.com Rocks!
Posts: 2280
Winston Oregon
Gender:
|
I can't do video, and hard to tell if it sounds similar or any different than any of those recorded. All I know is it is somewhat louder, but not bothersome to others.
The hole circle diameter @ 1.625 mite be kinda critical, as others that did this had trouble breaking bits because of something on the back side, I didn't have any problem @ 1.625. The holes only go thru the 3/16th thick plate. But I think I was careful to not go in much more to keep from striking anything inside. I started w/ 3/16th holes, and ended w/ 5/16th holes. I think its just right for loudness, and I don't think it sounds bad either. Several have done this, most were pleased, but others weren't and made other mods.
I did not rejet, except for the white spacer mod that I had done before. Stock jets....145 main, and I see no evidence of running lean. Others change to bigger jets before they ever touch the exhaust.
|