SuzukiSavage.com - clean aluminum

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › clean aluminum - forks risers etc.

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

clean aluminum - forks risers etc. (Read 102 times)

weracerc Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 594 Greensboro, NC Gender:	clean aluminum - forks risers etc. 04/18/12 at 07:54:37 new bike was a florida bike lots of yuck on the forks and risers colling fins on heads, exposed aluminum parts etc- who has the rocket science answer to cleaning this?
Back to top	"GOD Was Busy, He Sent The Marines" IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28905 L.A. California Gender:	Re: clean aluminum - forks risers etc. Reply #1 - 04/18/12 at 08:20:20 If it's corroding, the clear coat is gone. remove remaining spots of clear coat, polish and protect. I've been using a product called zoop on the polished areas. But you can repaint with clear coat.
Back to top	Versey's Place Tech Section Index IP Logged

spacepirates Serious Thumper Offline Igni Ferroque Posts: 515 Pittsburgh, PA Gender:	Re: clean aluminum - forks risers etc. Reply #2 - 04/18/12 at 11:11:27 I browsed around and along side of Zoop there is Everbrite which sounds like it does the same thing.
Back to top	-- Only a biker knows why a dog sticks his head out of a car window. IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: clean aluminum - forks risers etc. Reply #3 - 04/19/12 at 07:57:51 I use white diamond polish and sealer
Back to top	IP Logged

Routy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2280 Winston Oregon Gender:	Re: clean aluminum - forks risers etc. Reply #4 - 04/19/12 at 08:04:10 Mine had small blisters under the clear coat. I wanted to clean them, but changed my mind, it just wasn't worth it fighting the clear coat and all. This would only be done in a complete major restore,.... IMO.
Back to top	Rich '07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055) IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: clean aluminum - forks risers etc. Reply #5 - 04/19/12 at 08:38:40 a little Tal-strip II will take that clear right off no problem, just watch your overspray.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28905 L.A. California Gender:	Re: clean aluminum - forks risers etc. Reply #6 - 04/21/12 at 08:42:57 what's good for the goose... is good for the grouse http://www.skygeek.com/henkel-alodine-1001-quart.html?utm_source=googlebase&u...
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: clean aluminum - forks risers etc.
Reply #7 - 04/21/12 at 09:25:34

A palm sized orbital with a green scotch brite pad & a spray bottle of water made my clean up job sooo much easier,,
Some clear acrylic spray from Lowes & Whoopeee, it sure looks a lot better,, it downrite pretty again. The labor time would have been cut in half had I started with this approach instead of sanding by hand,,
Works great on the fin edges too, if you have the black jug,,

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home