Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Front Brake Lever Not Activating Brake Light?
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Front Brake Lever Not Activating Brake Light? (Read 132 times)
x1karr0usx
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 61
Front Brake Lever Not Activating Brake Light?
03/25/12 at 13:36:15
My rear brake lever activates the break light on my tail light, but my front brake lever isn't doing squat. Sometimes if I rapidly squeeze and release the front brake, the brake light does flicker and shows some signs of life.
Anyone got any ideas? Think connections in the lever are corroded, or something in the wiring? I'd be more comfortable with a target to shoot at, instead of spraying and praying!
Back to top
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28657
Tucson Az
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #1 -
03/25/12 at 13:44:53
Try "spraying " the connectors and contacts... with contact cleaner or WD-40..
Back to top
Ludicrous Speed !... ...
...
IP Logged
verslagen1
YaBB Moderator
ModSquad
Online
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #2 -
03/25/12 at 13:50:15
remove and replace the connectors on the switch and the controls harness under the tank.
if you got an ohm meter, test the switch.
Back to top
Versey's Place
Tech Section Index
IP Logged
prechermike
Serious Thumper
Alliance Member
Offline
Kalashna Kitty, from
Skat
Posts: 1190
Ponzer, NC
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #3 -
03/26/12 at 03:10:17
Be very very careful when you take the switch apart at the lever, my 87 has a tiny little part in there that will jump out and run away. It is the contact that slides back and forth with the lever. There are some tiny wires in there that can break as well. It takes tiny amounts of solder to get them connect correctly and not all together in one blob. Did I mention those parts are tiny, it does not help that my fingers are big. There is a thread about this somewhere. I know there are other connectors as well, but that was where my problem was. hth
Back to top
2006, HD pipe, Tkat fork brace, elkhide handgrips, gel seat w/riser, silverblue, Ed L's forward controls, Wristwatch, biblethumper650@gmail.com
IP Logged
SimonTuffGuy
Serious Thumper
Alliance Member
Offline
i like to thump...
;)
Posts: 1159
Central PA
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #4 -
03/26/12 at 05:00:43
I've got a friend that rides (not a Savage), but he said "I never use the front brake WITHOUT the rear", and his plans are to remove as much excess wiring as possible.
Back to top
Simon
Pimptiva.com
IP Logged
x1karr0usx
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 61
Re: Front Brake Lever Not Activating Brake Light?
Reply #5 -
03/26/12 at 08:03:59
SimonTuffGuy wrote
on 03/26/12 at 05:00:43:
I've got a friend that rides (not a Savage), but he said "I never use the front brake WITHOUT the rear", and his plans are to remove as much excess wiring as possible.
i would agree with that statement, and much of my ride time is controlled from the engine, not the brake (unless necessary). i use my prius for my long commutes everyday, so i am in the bad habit of avoiding my brakes to begin with. i would rather there not be any issues with inspection or safety though!
Back to top
IP Logged
greenmonster
Senior Member
Offline
Hellooooo Nurse!
Posts: 420
Vancouver BC
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #6 -
03/26/12 at 10:38:09
I had to replace the little switch in my hand brake. It had worn down over time and no longer rocked far enough to make contact. On the plus side, it was an inexpensive part and an easy fix as long as you pay attention to where everything is as you open it up.
Back to top
IP Logged
Savage_Rob
Serious Thumper
Alliance Member
Offline
Mechanically
Inclined Amateur
Posts: 6972
Texas (Dallas area)
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #7 -
03/26/12 at 14:04:32
SimonTuffGuy wrote
on 03/26/12 at 05:00:43:
I've got a friend that rides (not a Savage), but he said "I never use the front brake WITHOUT the rear", and his plans are to remove as much excess wiring as possible.
Personally, I try to add in rear brake as a practice and to maintain the habit and the feel for how much to give it. However, in most situations and especially normal dry pavement I would reverse that statement to say "I never use the rear brake WITHOUT the front" since front brake is more important. It's a personal thing with me because whenever I've gone down it was from locking the rear brake. These were emergency braking situations that necessitate pulling the seat cover out from between your cheeks afterward. I now make a point of practicing emergency braking pretty regularly.
Back to top
1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
IP Logged
Ben aka ubergeek
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 14
Columbus, OH
Gender:
Re: Front Brake Lever Not Activating Brake Light?
Reply #8 -
03/26/12 at 15:59:35
I had this same problem on my '87. I ordered the contact Part# 57465-18601. $3.40 plus shipping from motosport.com.
Take out the two screws that hold the board in. On the board will be two metal contacts spaced apart. If they are corroded, just take some sandpaper and lightly remove the corrosion. If that doesn't work then use a razor blade. Note the direction of the metal contacts. The little contact that fits up inside will be rounded on two ends with a spring. Make sure that it will slide with the rounded edges going over the board contacts. Do not force the contact back into the brake handle. That being said, it will kinda just pop up in there when you've aligned it properly and should not fall out too easily. Make sure not to smash the two wires with the cover. There is a little notch for the wires to run through.
I did this in about 5 minutes. No sweat. Also if your rear brake doesn't light up until you have the pedal pressed all the way, you can either try and adjust the nuts on the cable mounting bracket or buy a new spring. My spring was about 3" long. The new one was only 1.5".
After you get the new contact (or clean the old ones), try spraying some silicone over the bottom of the switch. This should prevent corrosion in the future.
Back to top
87 Savage, Dyna Muffler
IP Logged
x1karr0usx
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 61
Re: Front Brake Lever Not Activating Brake Light?
Reply #9 -
03/27/12 at 08:47:59
Thanks Ben! Good write up!
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/26/24 at 19:27:35
›
General Category
›
Rubber Side Down!
› Front Brake Lever Not Activating Brake Light?
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.