SuzukiSavage.com - License Plate Bracket needed

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › License Plate Bracket needed

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

License Plate Bracket needed (Read 70 times)

DrunkenDwarf

Senior Member

Offline

Morning Zombie

Posts: 325
Seattle, WA
Gender: male

License Plate Bracket needed
02/05/12 at 10:10:25

My plate has cracked on both corners. I don't have a location or ability to fabricate something right now (renting and tools are in storage).

I prefer DIY, but if I have to there's always: Amazon.com: Bell License Plate Frame

Open to suggestions not already mentioned (and reminders of ones I may overlook) in previous threads.

Previous threads on the same issue.
License Plate Tearing at High Speed
Plate vibrates off

-D. Dwarf

Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock

IP Logged

prechermike Serious Thumper Alliance Member Offline Kalashna Kitty, from Skat Posts: 1190 Ponzer, NC Gender:	Re: License Plate Bracket needed Reply #1 - 02/05/12 at 10:23:11 I bought that from Wat Mart when I first got my bike and have not had any problems. It seems like I paid a dollar or so more, but there was no shipping.
Back to top	2006, HD pipe, Tkat fork brace, elkhide handgrips, gel seat w/riser, silverblue, Ed L's forward controls, Wristwatch, biblethumper650@gmail.com IP Logged

ratz Junior Member Offline Wait.......what?? Posts: 92 Alabama Gulf Coast Gender:	Re: License Plate Bracket needed Reply #2 - 02/05/12 at 11:01:17 I put an aluminum plate I cut behind mine and put bolts through all four corners,but since you can't fab anything right now you might try flipping an old license plate over and bolting to yours on all four corners.Should stiffen it up enough.
Back to top	IP Logged

arteacher Serious Thumper Offline Ride as if your naked and invisable! Posts: 2581 London ontario Gender:	Re: License Plate Bracket needed Reply #3 - 02/05/12 at 12:16:08 Just wander on down to your local dealer and ask for a plate cover. They'll probably give you one - with their name on it. Then bolt it on with four bolts, and your done.
Back to top	white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt IP Logged

DrunkenDwarf

Senior Member

Offline

Morning Zombie

Posts: 325
Seattle, WA
Gender: male

Re: License Plate Bracket needed
Reply #4 - 02/05/12 at 20:09:43

ratz wrote on 02/05/12 at 11:01:17:

I put an aluminum plate I cut behind mine and put bolts through all four corners,but since you can't fab anything right now you might try flipping an old license plate over and bolting to yours on all four corners.Should stiffen it up enough.

Thanks for the idea. I do have an old plate around here somewhere. I may even epoxy them together.

-D. Dwarf

Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home