Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› License Plate Bracket needed
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
License Plate Bracket needed (Read 70 times)
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
License Plate Bracket needed
02/05/12 at 10:10:25
My plate has cracked on both corners. I don't have a location or ability to fabricate something right now (renting and tools are in storage).
I prefer DIY, but if I have to there's always:
Amazon.com: Bell License Plate Frame
Open to suggestions not already mentioned (and reminders of ones I may overlook) in previous threads.
Previous threads on the same issue.
License Plate Tearing at High Speed
Plate vibrates off
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
prechermike
Serious Thumper
Alliance Member
Offline
Kalashna Kitty, from
Skat
Posts: 1190
Ponzer, NC
Gender:
Re: License Plate Bracket needed
Reply #1 -
02/05/12 at 10:23:11
I bought that from Wat Mart when I first got my bike and have not had any problems. It seems like I paid a dollar or so more, but there was no shipping.
Back to top
2006, HD pipe, Tkat fork brace, elkhide handgrips, gel seat w/riser, silverblue, Ed L's forward controls, Wristwatch, biblethumper650@gmail.com
IP Logged
ratz
Junior Member
Offline
Wait.......what??
Posts: 92
Alabama Gulf Coast
Gender:
Re: License Plate Bracket needed
Reply #2 -
02/05/12 at 11:01:17
I put an aluminum plate I cut behind mine and put bolts through all four corners,but since you can't fab anything right now you might try flipping an old license plate over and bolting to yours on all four corners.Should stiffen it up enough.
Back to top
IP Logged
arteacher
Serious Thumper
Offline
Ride as if your
naked and invisable!
Posts: 2581
London ontario
Gender:
Re: License Plate Bracket needed
Reply #3 -
02/05/12 at 12:16:08
Just wander on down to your local dealer and ask for a plate cover. They'll probably give you one - with their name on it. Then bolt it on with four bolts, and your done.
Back to top
white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt
IP Logged
DrunkenDwarf
Senior Member
Offline
Morning Zombie
Posts: 325
Seattle, WA
Gender:
Re: License Plate Bracket needed
Reply #4 -
02/05/12 at 20:09:43
ratz wrote
on 02/05/12 at 11:01:17:
I put an aluminum plate I cut behind mine and put bolts through all four corners,but since you can't fab anything right now you might try flipping an old license plate over and bolting to yours on all four corners.Should stiffen it up enough.
Thanks for the idea. I do have an old plate around here somewhere. I may even epoxy them together.
-D. Dwarf
Back to top
Pearl White 2007 S40; Dyna exhaust; Current jets: 52.5 w/ bleed (2 turns out) / 1.5mm (0.06") spacer / 150; raptor petcock
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/23/24 at 12:27:39
›
General Category
›
Rubber Side Down!
› License Plate Bracket needed
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.