SuzukiSavage.com - engine rpm questions

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › engine rpm questions

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

engine rpm questions (Read 202 times)

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28637 Tucson Az Gender:	Re: engine rpm questions Reply #15 - 01/30/12 at 12:20:27 bikertrash wrote on 01/30/12 at 11:58:31: What do you guys weigh? Maybe the savage will do the ton if piloted by a light-weight . . . I'm 140lb,.. and I topped out at 95mph, tucked like paint... with K/N, Dyna, and rejet... 140/90-15 rear... ... maybe if could find 5 mile 30 degree downgrade?... 20mph tailwind?... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

bikertrash

Full Member

Offline

another bad example

Posts: 171
Ogden, Illinois
Gender: male

Re: engine rpm questions
Reply #16 - 01/30/12 at 12:31:29

I think you qualify as a light weight (although you would be a big guy in the moto gp crowd).

Thanks for the info--I had hoped to see triple digits on this bike, but at 150 lbs, will have to be satisfied with low to mid 90s, I suppose.

Ah well. I already have a bike that will get me a "fast driving award" without even trying. Maybe this bike will help keep me out of trouble. Wink

If you are not living on the edge, you are taking up too much space.

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: engine rpm questions Reply #17 - 01/30/12 at 12:32:01 90 uphill stock engine, supertrapp, pod filter, mt90-16 rear, ~50mpg, 240, eyeball level with flyscreen, grin ear to ear, occassional evil laugh. 95 uphill before I hit traffic, ~40mpg as above with quicksilver carb, double grin.
Back to top	Versey's Place Tech Section Index IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6048 Grand Junction Colorado Gender:	Re: engine rpm questions Reply #18 - 01/30/12 at 14:40:51 10k rpm from suzuki service manual(c1990) page 12-12 where it shows how to test the ignitor unit
Back to top	standing for those who stood for US IP Logged

ratz Junior Member Offline Wait.......what?? Posts: 92 Alabama Gulf Coast Gender:	Re: engine rpm questions Reply #19 - 02/01/12 at 20:21:00 Good to know there seems to be a spec for it. A little while back when I tested it with a function generator and an o'scope I didn't find a rev limiter because I didn't go above 8500 rpm.Didn't figure I needed to since the redline on the engine is 6500. Shows what I know!
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home