Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
ebay risers fitment (Read 95 times)
kuri77
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 127
Rancho Santa Margarita, Ca
Gender: male
ebay risers fitment
01/23/12 at 17:07:33
 
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170678545302&category=3559...

Anybody used these or know if they will work without any changes to cables, hoses or wires?
Back to top
 
 

Big Sur
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male
Re: ebay risers fitment
Reply #1 - 01/23/12 at 17:12:56
 
1st off... they're for 7/8" bars.
2nd....... hole pattern between 7/8 bar clamps and 1" are different usually.

So no... don't think they'll fit.
Back to top
 
 
WWW   IP Logged
kuri77
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 127
Rancho Santa Margarita, Ca
Gender: male
Re: ebay risers fitment
Reply #2 - 01/23/12 at 21:35:19
 
Missed the 7/8 inch part just saw the LS650 in the title.  Did older Savages have that size handlebars?  Or is it just an error on seller's part?
Back to top
 
 

Big Sur
  IP Logged
EJID
Serious Thumper
*****
Offline

Work to ride and
ride to work.

Posts: 1536
Pocatello, ID
Gender: male
Re: ebay risers fitment
Reply #3 - 01/23/12 at 21:50:11
 
kuri77 wrote on 01/23/12 at 21:35:19:
Missed the 7/8 inch part just saw the LS650 in the title.  Did older Savages have that size handlebars?  Or is it just an error on seller's part?


Pretty sure it's a seller's error. All Savage/S40 bikes have 1" bars the older Savage dirt bikes from the 70's might be 7/8" but I'm not sure.
Back to top
 
 

05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500
  IP Logged
brucey
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 48
Massachusetts
Gender: male
Re: ebay risers fitment
Reply #4 - 01/24/12 at 11:13:17
 
Those are not normal risers, it looks like they screw into existing risers to change the position of the bars. It seems to me they would not look very nice (just my opinion), your better off with some regular risers for 1" bars
Back to top
 
 
  IP Logged
drums1
Serious Thumper
*****
Offline

'87 Savage
Bashed--Down for the
count

Posts: 664
Racine, Wisconsin
Gender: male
Re: ebay risers fitment
Reply #5 - 01/25/12 at 10:51:01
 
Not to mention the twin bolt mount at the bottom. Ours are a single bolt mount.
Back to top
 
 
  IP Logged
Savage_Rob
Serious Thumper
Alliance Member
*****
Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male
Re: ebay risers fitment
Reply #6 - 01/25/12 at 12:14:14
 
These are some that Lancer pointed out to me years ago and I've been using since.  I went from buckhorn bars to wide drag bars with these.  They have a slight pullback.  Hmmm, I think they're even the same price they were back then.

Back to top
 
 

1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
Savage_Rob RidingTX   IP Logged
kuri77
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 127
Rancho Santa Margarita, Ca
Gender: male
Re: ebay risers fitment
Reply #7 - 01/26/12 at 19:56:00
 
Thanks for the info.  So who makes them?
Back to top
 
 

Big Sur
  IP Logged
Savage_Rob
Serious Thumper
Alliance Member
*****
Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male
Re: ebay risers fitment
Reply #8 - 01/27/12 at 07:06:36
 
kuri77 wrote on 01/26/12 at 19:56:00:
Thanks for the info.  So who makes them?


Just click on the image.
Back to top
 
 

1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
Savage_Rob RidingTX   IP Logged
kuri77
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 127
Rancho Santa Margarita, Ca
Gender: male
Re: ebay risers fitment
Reply #9 - 01/27/12 at 19:25:58
 
Doh! Thanks.
Back to top
 
 

Big Sur
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/22/24 at 00:36:35



General CategoryRubber Side Down! › ebay risers fitment


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.