SuzukiSavage.com - Mounting bolt through crankcase?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Mounting bolt through crankcase?

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Mounting bolt through crankcase? (Read 116 times)

wombat Full Member Offline SuzukiSavage.com Rocks! Posts: 109	Mounting bolt through crankcase? 10/17/11 at 16:53:17 I removed the lower mounting bolt and it was coated in engine oil. The bolt appears to go through the crankcase. Is it possible that it sits in oil? If so how do I prevent leaks when I put the bolt back?
Back to top	IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: Mounting bolt through crankcase? Reply #1 - 10/17/11 at 16:55:17 The bolts go through channels outside the case, not through the actual crankcase.
Back to top	Travel kills ignorance. IP Logged

Oldfeller--FSO Serious Thumper ModSquad Offline Hobby is now "concentrated neuropany" Posts: 12671 Fayetteville, NC Gender:	Re: Mounting bolt through crankcase? Reply #2 - 10/17/11 at 16:56:49 It does not sit in oil, except what leaked into the through hole because the 50 foot pounds of clamping pressure was removed. When you torque that big long bolt back up to 50 foot pounds, the leak will stop again.
Back to top	Former Savage Owner IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28644 Tucson Az Gender:	Re: Mounting bolt through crankcase? Reply #3 - 10/17/11 at 17:00:59 Oldfeller--FSO wrote on 10/17/11 at 16:56:49: When you torque that big long bolt back up to 50 foot pounds, the leak will stop again. Torque it to 80lbs and it will squeeze more cubes into the head... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

Routy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2280 Winston Oregon Gender:	Re: Mounting bolt through crankcase? Reply #4 - 10/18/11 at 16:07:14 Supporting the above,...... I know that when removing the long bolts that the hold the side stand mount, (necessary for installing FCs) oil will sometimes seep out of the split in crankcase. When the bolts are reinstalled and tightened, it will not leak.
Back to top	Rich '07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055) IP Logged

Savage 1987 Junior Member Offline SuzukiSavage.com Rocks! Posts: 56	Re: Mounting bolt through crankcase? Reply #5 - 10/20/11 at 07:34:04 Good to know. I was wondering the same thing the other day.
Back to top	IP Logged

scottnj Junior Member Offline SuzukiSavage.com Rocks! Posts: 58 the 'Nati, OH Gender:	Re: Mounting bolt through crankcase? Reply #6 - 10/20/11 at 09:13:27 +1 Routy. I had the same experience when mounting forward controls. No leaks since.
Back to top	2007 S40 (Supertrapp, 6" Ed. L forward controls, K&N, & some other stuff) IP Logged

Pages: 1

« Home