SuzukiSavage.com - suspension fork assembly

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › suspension fork assembly

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

suspension fork assembly (Read 157 times)

Valerio YaBB Newbies Offline Posts: 12 Portugal Gender:	suspension fork assembly 08/18/11 at 17:16:42 Hello everyone, I needed help, after mounting the suspension fork and put the top cap bolt the suspension is very hard and thoroughly, that I am doing wrong or what procedure? thanks
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: suspension fork assembly Reply #1 - 08/18/11 at 17:20:18 Why did you take the fork off?
Back to top	Versey's Place Tech Section Index IP Logged

MotoBuddha

Serious Thumper

Offline

Let's roll!

Posts: 1416
Charlotte, NC

Re: suspension fork assembly
Reply #2 - 08/18/11 at 17:23:22

O seu Inglês é um pouco confuso. Talvez você deve fazer sua pergunta novamente em português e então nós podemos executá-lo através de um tradutor automático para ver se sua pergunta é fácil de entender.

http://babelfish.yahoo.com/translate_txt

Its English is a little confused. Perhaps you must make its question in Portuguese again and then we can execute it through an automatic translator to see if its question is easy to understand.

Travel kills ignorance.

IP Logged

Max_Morley Serious Thumper Offline LT650 Luxury Touring & sidecar rig Posts: 1490 Moses Lake. WA Gender:	Re: suspension fork assembly Reply #3 - 08/18/11 at 19:11:18 Did you put in too much fork oil? If it is overfilled the oil will not compress like air and prevent the fork from compressing. Max
Back to top	Max at Thumper Acres. '96 Savage bagger, '03 Savage w/Cozy sidecar for wifeni. IP Logged

serenity3743 Serious Thumper Offline Striving to better, oft we mar what's well Posts: 778 Black Mountain, NC Gender:	Re: suspension fork assembly Reply #4 - 08/19/11 at 05:22:55 It is necessary to press very hard on the tube cap nut when starting to thread it into the tube. Sometimes the handlebars are in the way and need to be removed so that you can get a socket on the nut and apply weight and pressure.
Back to top	2000 LS650P Suzuki windshield, luggage rack, saddle bag racks, k & n air filter, Dyna muffler,2/3 white spacer, do-it-myself seat. Love to ride! IP Logged

Valerio

YaBB Newbies

Offline

Posts: 12
Portugal
Gender: male

Re: suspension fork assembly
Reply #5 - 08/26/11 at 15:25:24

Good evening, excuse the absence, what happened was I had removed the top fork caps, without touching the rest of the suspension, the next time I put the caps, the suspension is hard, I do not know if it will be a sheath has more air pressure than another, whether to adjust all the screws on the suspension, I do not know, thanks

IP Logged

T2 Junior Member Offline SuzukiSavage.com Rocks! Posts: 83 Frederick, CO	Re: suspension fork assembly Reply #6 - 08/27/11 at 14:02:37 It sounds like the fork tubes collapsed to a compressed position while the top cap was off. Make sure the fork tubes are extended to their maximum length and try again.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: suspension fork assembly Reply #7 - 08/27/11 at 17:32:19 Did oil come out?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Valerio YaBB Newbies Offline Posts: 12 Portugal Gender:	Re: suspension fork assembly Reply #8 - 08/28/11 at 05:27:01 no oil left, I put the tubes in several positions, and always stuck after putting the caps, is that which separates the spring and the spacer has to be in a specific position? It's weird ... since they just took the covers and put back, thank you
Back to top	IP Logged

Valerio YaBB Newbies Offline Posts: 12 Portugal Gender:	Re: suspension fork assembly Reply #9 - 08/29/11 at 14:03:55 Done the problem was in the bottom bracket, after completing the assembly of the suspension, we must relieve the screws to level the bottom bracket, simple things that affect things big thanks to everyone who tried to help
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home