SuzukiSavage.com - about to drill holes in exhust have u done this

Raider91606 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 20	about to drill holes in exhust have u done this 07/20/11 at 18:22:40 looking for others that have done the holes in muffler mod im about do it soon as it cools down any does or donts??? i have asked this b4 just looking for last minute tips from the more exp people here
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28660 Tucson Az Gender:	Re: about to drill holes in exhust have u done Reply #1 - 07/20/11 at 18:33:10 don't?... ... (instead of sounding like a sewing machine,... it'll sound like an obnoxious sewing machine...) Get a Harley shorty muffler,... save 8lbs, and get a good tone... Harley muffler guide...
Back to top	Ludicrous Speed !... ... ... IP Logged

Tiefighterpilot Senior Member Offline Daily Rider Posts: 346 San Francisco	Re: about to drill holes in exhust have u done Reply #2 - 07/20/11 at 18:49:30 Drill and see if you like it. It's not bad. But not great. Hd muffler sounds good.
Back to top	2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: about to drill holes in exhust have u done Reply #3 - 07/20/11 at 18:58:30 Save the stock muffler, in case the law say you MUST have a stock muffler, spend 20 bucks & get a Dyna.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Routy

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 2280
Winston Oregon
Gender: male

Re: about to drill holes in exhust have u done
Reply #4 - 07/20/11 at 21:02:30

Why don't you guys tell him what a "direct fit" it is too Grin

I like the drilled stock, sounds nothing like a sewing machine whatsoever. It sounds like stock,....only louder.

If you drill like the picture I posted before, be careful when going thru,.....I didn't have any trouble, but someone said they hit stuff on the back that broke drill bit.

Back to top

Rich
'07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055)

IP Logged

Raider91606

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 20

Re: about to drill holes in exhust have u done
Reply #5 - 07/20/11 at 21:50:42

ok just did the driling holes like you posted! sounds ok! not to bad at all! really not that much louder! but i can hear it now drove it about 5 miles seems the same perfomance wise
thank you!

will the dyna make it louder????

Routy wrote on 07/20/11 at 21:02:30:

Why don't you guys tell him what a "direct fit" it is too Grin

I like the drilled stock, sounds nothing like a sewing machine whatsoever. It sounds like stock,....only louder.

If you drill like the picture I posted before, be careful when going thru,.....I didn't have any trouble, but someone said they hit stuff on the back that broke drill bit.

Back to top

IP Logged

Routy Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2280 Winston Oregon Gender:	Re: about to drill holes in exhust have u done Reply #6 - 07/21/11 at 03:59:30 I have never heard the Dana on this bike, but from all reports it is a little louder w/ baffle left in place, and also the best sounding. Also from many reports it can be difficult to get a good seal when installing this muffler.
Back to top	Rich '07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055) IP Logged

Arnold Serious Thumper Offline The dude abides... Posts: 896 Westchester, NY Gender:	Re: about to drill holes in exhust have u done Reply #7 - 07/21/11 at 11:04:24 Check youtube, bunch of Savages with all kind of different mufflers there.
Back to top	IP Logged