Hi, all -
so as you know, my cam chain tensioner separated, and I'm waited for the Verslavy mod. My plan is to install it without replacing the cam chain, just hope to get as many miles as possible.
I assume the bike has never had its valves adjusted in 10k miles, so this is also on my to-do list. My question is, can I do this before I put the new tensioner in, or do I need cam chain tension on it to adjust valves? Furthermore, once I install the new tensioner, should I drive the bike for a bit to make sure the slack is taken out, and then (after letting the engine cool for a day, of course) do the valves? Or can I put the new tensioner in, and then turn the motor over manually a few times and then do the valves?
Finally, does anybody have any feeler gauge recommendations for this? I saw these:
http://www.amazon.com/gp/product/B0009OR94M/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486...but they are too fat. Are there longer angled feeler gauges like this anyone can recommend for the Savage?
Thanks!
Andy