Howdy,
Been reading a few things here since I got my bike a couple months ago and found the service manual and owner's manual to be great. I got a 2002 LS650 and its my first bike. Took the safety course and found a good deal on Craig's list and picked it up so I'm still a fairly new rider.
Replaced wheels and had oil changed the day after I got it and its been running great up until this past week.
Took it down to Houston on the 2nd (about 4 hour ride) and it ran great the whole way down. On July 4th, it wouldn't start like normal so I leveled it out (driveway on an incline) and found fuel level to be fine and such. Switched to RES, still no go. Put it in PRI and it started up. Switched back to ON/RES and it died after about 20 seconds.
Also, it started backfiring like crazy when idling (and dying) and when letting off the throttle, which it had never done before. I slightly adjusted the idle screw and it no longer dies when idling and the backfiring seems to have stopped when idling as well.
I read some threads on here but I'm not gonna lie, I am not familiar at all with working on my own vehicles other than basic stuff. Cleaned out air filter, replaced the fuel line hose (it had a small leak) but I found this hose loose and don't know what its for and am thinking it may be an issue? Pics below show side and location of said hose (sorry if they are big, I didn't edit them and my camera is on biggest reso it has):
1. What is this hose?
2. Should it be clamped off or attached to something?
I live in apartment complex and I'm not able to work on the bike here though I can take it to a friend's house this weekend and open it up if need be.
I can run it as it is but I don't like that the bike isn't running like it should and would much rather fix it instead of ignoring it.
Thanks in advance for the help and sorry for butchering any technical terms.