SuzukiSavage.com - Torque Specs

Welcome, Guest. Please Login or Register :: View Members

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Torque Specs (Read 130 times)

RpNSht Ex Member	Torque Specs 06/26/11 at 17:48:27 Anybody have a chart of all the torque specs for the savage? Much obliged.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Torque Specs Reply #1 - 06/26/11 at 18:37:31 In the tech section Check the link.
Back to top	Versey's Place Tech Section Index IP Logged

RpNSht

Ex Member

Re: Torque Specs
Reply #2 - 06/26/11 at 19:44:33

tekxtc wrote on 11/04/04 at 09:58:32:

Just in case the page gets lost:

ITEM	N-m	\|	ft-lb
Rear axle nut	55.0	88.0	\|	40.5	64.9
Engine drive pulley nut (RH)	100.0	130.0	\|	73.7	95.8
Exhaust pipe clamp bolts	18.0	28.0	\|	13.3	20.6
Front axle nut	36.0	52.0	\|	26.5	38.3
Front axle pinch bolt and nut	15.0	25.0	\|	11.1	18.4
Spoke nipples	4.0	5.0	\|	2.9	3.7
Rear driven pulley Mounting nuts	50.0	70.0	\|	36.9	51.6
Rear driven pulley Side plate bolt	9.0	13.0	\|	6.6	9.6
Driven pulley nut	100.0	130.0	\|	73.7	95.8
Shock absorber mounting nuts	20.0	30.0	\|	14.7	22.1
Front caliper mounting bolts	25.0	40.0	\|	18.4	29.5
Front caliper pad pin bolt	10.0	15.0	\|	7.4	11.1
Front caliper bleed valve	6.0	9.0	\|	4.4	6.6
Oil drain plug	12.0	18.0	\|	8.8	13.3
Fork cap bolt	35.0	55.0	\|	25.8	40.5
Cylinder head nuts (9mm)	29.0	33.0	\|	21.4	24.3
Cylinder head-to-cylinder nuts (8mm)	23.0	27.0	\|	17.0	19.9
Cylinder-to-crankcase nuts	8.0	12.0	\|	5.9	8.8
Rocker arm shaft(exhaust) set bolt	8.0	10.0	\|	5.9	7.4
Engine mounting No. 1 bolts and nuts	37.0	45.0	\|	27.3	33.2
Engine mounting No. 2 bolt	70.0	88.0	\|	51.6	64.9
Engine mounting No. 3 bolts and nuts	70.0	88.0	\|	51.6	64.9
Engine mounting No. 4 bolt and nut	70.0	88.0	\|	51.6	64.9
Engine mounting No. 5 Allen	20.0	30.0	\|	14.7	22.1
Cylinder head cover bolts	8.0	12.0	\|	5.9	8.8
Cylinder head cover cover plug	25.0	30.0	\|	18.4	22.1
Camshaft sprocket bolts	14.0	16.0	\|	10.3	11.8
Camshaft chain tensioner set bolt	20.0	25.0	\|	14.7	18.4
Camshaft chain tensioner Plate bolt	8.0	12.0	\|	5.9	8.8
Valve adjuster locknut	13.0	16.0	\|	9.6	11.8
Cylinder base nuts	8.0	12.0	\|	5.9	8.8
Decompression lever nut	15.0	20.0	\|	11.1	14.7

is this right? i was following it and broke 3 bolts...old bolts or bad info?

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Torque Specs Reply #3 - 06/26/11 at 19:47:57 Or outta spec wrench? You got a clicker or a beam?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Torque Specs Reply #4 - 06/26/11 at 21:09:25 Having a ssm and clymers on hand I don't refer to this but many have. What bolts did you break? Many times its the. Nomenclature that gets you.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

« Home