Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Clutch not fully disengage (Read 104 times)
tixin
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 26

Clutch not fully disengage
06/22/11 at 13:06:19
 
I squeezed the lever all the way, but the clutch won't fully disengage.  The lever by the transmission is stiff and moves up and down as I operate the clutch.  Tried to adjust the cable to no avail.  Maybe I didn't do it right.  Please advise. Thanks.

Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Clutch not fully disengage
Reply #1 - 06/22/11 at 13:17:03
 
Soo, if you put it in Neutral & start it & pull the clutch in & stick it in 1st, the bike starts rolling?
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
tixin
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 26

Re: Clutch not fully disengage
Reply #2 - 06/22/11 at 13:22:16
 
Starting is another problem in my other thread! If I try to start in first gear with clutch compress, the bike will want to roll forward. If I try to push it in first gear, there is quite a resistance.
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Clutch not fully disengage
Reply #3 - 06/22/11 at 13:25:03
 
How much "wiggle" is there to the clutch lever before it starts pulling n the cable?
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
youzguyz
Serious Thumper
*****
Offline



Posts: 2538
San Antonio, Texas
Gender: male
Re: Clutch not fully disengage
Reply #4 - 06/22/11 at 13:25:14
 
It's a wet clutch.  It doesn't "slip" very well unless the engine is running and oil is circulating.
Like JOG said.. get it running 1st, then see how the clutch works.
Back to top
 
 

2002 - Silver (Thumper)
2000 - Green (Mad Hamish)
Most motorcycle problems are caused by the nut between the seat and the handlebars. Make sure yours isn't too tight or too loose.
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Clutch not fully disengage
Reply #5 - 06/22/11 at 13:25:43
 
Need your bikes history. How much riding have you done on itz?
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
tixin
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 26

Re: Clutch not fully disengage
Reply #6 - 06/22/11 at 13:37:18
 
The bike has 3,800 miles ... and I have not logged a single mile on it yet Sad !!  There is virtually no "wiggle" on the hand lever. Thanks.
Back to top
 
 
  IP Logged
bill67
Serious Thumper
*****
Offline

old  tired

Posts: 8517
genoa city wisconsin
Gender: male
Re: Clutch not fully disengage
Reply #7 - 06/22/11 at 13:39:11
 
Put some Sea Foam in the oil and that it run some,Should clear up the problem.
Back to top
 
 

william h krumpen
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Clutch not fully disengage
Reply #8 - 06/22/11 at 13:41:48
 
Lets get it started first,, start in Neutral.
Back to top
 
 

The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
runwyrlph
Serious Thumper
*****
Offline

Semper ubi sub ubi

Posts: 846
pa
Gender: male
Re: Clutch not fully disengage
Reply #9 - 06/22/11 at 15:20:03
 
youzguyz wrote on 06/22/11 at 13:25:14:
It's a wet clutch.  It doesn't "slip" very well unless the engine is running and oil is circulating.
Like JOG said.. get it running 1st, then see how the clutch works.

+1

normal for the bike

- try to roll it with clutch in - very hard if it's been sitting
- start it in 1st with clutch in, "jumps" forward a little

my guess is your clutch's okay
Back to top
 
 

2007 s40 -stock -white spacer out -repaired to rideable condition!
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28633
Tucson Az
Gender: male
Re: Clutch not fully disengage
Reply #10 - 06/22/11 at 15:21:58
 
+1...
Back to top
 
 

Ludicrous Speed !... ... Huh...
  IP Logged
tixin
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 26

Re: Clutch not fully disengage
Reply #11 - 06/22/11 at 18:16:01
 
GREAT!  That's one worry off my mind.  Now I can concentrate on starting the bike.  Thanks.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/20/24 at 21:40:59



General CategoryRubber Side Down! › Clutch not fully disengage


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.