SuzukiSavage.com - Crankcase breather specs?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Crankcase breather specs?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Crankcase breather specs? (Read 149 times)

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Crankcase breather specs? 06/09/11 at 13:47:48 Does anyone happen to know the rough specs for the volume and pressure of air coming out of the crankcase breather? I think I might have a line on a nice, small filter I could use since the stock airbox is gone.
Back to top	Travel kills ignorance. IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28651 Tucson Az Gender:	Re: Crankcase breather specs? Reply #1 - 06/09/11 at 14:39:49 No spec for that,... any that fits the hose should do...
Back to top	Ludicrous Speed !... ... ... IP Logged

Boofer Serious Thumper Offline Nearly too old. Posts: 1760 N Ms Gender:	Re: Crankcase breather specs? Reply #2 - 06/12/11 at 16:56:12 Auto Zone, Oreilly's, and Advance auto parts. I saw them in one of those recently and put them down in my brain for future use.
Back to top	2001 Black, Spitfire windshield, Headlight upgrade, Sissy rack, Tool bag, Fork bag, Harley muffler, Memory foam seat, Crash bars. Hwy pegs, Raptor. IP Logged

TheSnakeLady Full Member Offline Thumpers Rule!!! Posts: 152 Central New York Gender:	Re: Crankcase breather specs? Reply #3 - 06/12/11 at 17:20:02 Found this at advanced auto, it fits 3/8 to 1/2 id, I went to my local ace hardware and got a 1/2 od brass union and a couple small hose clamps and tada! Advanced auto has a couple other colors to choose from also. The stock breather hose is 1/2 so it fits perfect! Hope this is what you were looking for.
Back to top	My ride is a 2005 LS650, customized with ISO grips, cone air filter, stage 1 jets, Jardine exhaust, solo seat, AM turn sigs, and a catseye tail light. Next year, custom paint job (hopefully)! IP Logged

MotoBuddha

Serious Thumper

Offline

Let's roll!

Posts: 1416
Charlotte, NC

Re: Crankcase breather specs?
Reply #4 - 06/12/11 at 18:17:53

The one I'm thinking about is about the size of a thimble, not much larger than the diameter of the breather hose. Very easy to hide away -- assuming it can breathe enough. I mean, if the hose itself passes enough volume to keep the crankcase happy, the filter doesn't need to be any larger in diameter, as long as the filtering material doesn't restrict flow.

Travel kills ignorance.

IP Logged

CalisOsin Senior Member Offline Rather die, than live down on my knees. Posts: 297 Orange County, Ca Gender:	Re: Crankcase breather specs? Reply #5 - 06/13/11 at 08:21:46 Moto - What filter are you planning on using? I've been lookign for a smaller one to fit on mine as well.
Back to top	'97, k&n airfilter, bcb pipe, custom leather seat, monoshock, custom bars IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: Crankcase breather specs? Reply #6 - 06/13/11 at 08:53:36 CalisOsin wrote on 06/13/11 at 08:21:46: Moto - What filter are you planning on using? I've been lookign for a smaller one to fit on mine as well. Perhaps one of these: http://www.mcmaster.com/#breather-vents/=cqbjup
Back to top	Travel kills ignorance. IP Logged

CalisOsin Senior Member Offline Rather die, than live down on my knees. Posts: 297 Orange County, Ca Gender:	Re: Crankcase breather specs? Reply #7 - 06/13/11 at 09:42:23 Perferct, thanks!
Back to top	'97, k&n airfilter, bcb pipe, custom leather seat, monoshock, custom bars IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home