SuzukiSavage.com - Ryca build Progressive shock question

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Ryca build Progressive shock question

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Ryca build Progressive shock question (Read 110 times)

runrun

Junior Member

Offline

Thump thump

Posts: 77
Erie, CO

Ryca build Progressive shock question
06/02/11 at 21:19:22

I've received my final batch of Ryca parts, including the optional Progressive shocks. As I'm going to be using the brake light/license plate combo, Ryca suggests installing travel limiters (supplied) on the shocks. In order to install the limiters, the shocks first need to be disassembled enough to be able to remove the springs. I've not disassembled a shock before -- any suggestions? Thanks.

IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: Ryca build Progressive shock question Reply #1 - 06/03/11 at 13:40:15 The folks at Ryca have been very responsive to my question, even trivial ones. So you might email them for instructions.
Back to top	Travel kills ignorance. IP Logged

sbaugz Ex Member	Re: Ryca build Progressive shock question Reply #2 - 06/03/11 at 20:30:30 might also consider dropping progessive a line, or check their website. I would be willing to bet they have a tech section that covers the 440 series shocks.
Back to top	IP Logged

runrun Junior Member Offline Thump thump Posts: 77 Erie, CO	Re: Ryca build Progressive shock question Reply #3 - 06/04/11 at 18:43:28 thanks guys. both ryca and progressive were helpful. it's probably possible to insert the pieces of the limiters between the spring coils and get away without dismantling the shock, but i've ordered a progressive shock tool to make disassembly easy.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home