spacepirates
Serious Thumper
Offline
Igni Ferroque
Posts: 515
Pittsburgh, PA
Gender:
|
Two things you can do:
1) pull the head, slide the bolt out and forget it 2) cut a spacer, top with some washers and tighten it down (which is what I did)
you CAN get to the bottom of the bolt, though it is a bit tricky. it is recessed under some fins, like Oldfeller said.
also, if you remove the bolt you may get an oil leak. I left the bolt rattle around for a month or so and saw a little leakage. some people might disagree, but i'm fairly sure that was the cause.
|