Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Am I forgetting anything?
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Am I forgetting anything? (Read 209 times)
Russ130
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 62
Am I forgetting anything?
05/02/11 at 22:26:03
My bike smokes at start-up and when I pull to a light I can smell oil burning. So with that in mind I bought rings and valve seals plus a head gasket, cylinder gasket, cam tensioner, clutch cover gasket, seal plug, crank bolt cover and a couple different types of rtv. I also bought a gasket making kit so I may be able to make a head cover gasket instead of using rtv. Is there anything I'm overlooking or anything I should do while I have everything apart?
Back to top
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: Am I forgetting anything?
Reply #1 -
05/02/11 at 22:34:00
You bought a tensioner, did you buy a chain?
Back to top
Versey's Place
Tech Section Index
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Am I forgetting anything?
Reply #2 -
05/03/11 at 03:45:30
& soak that chain in oil before the install..
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Russ130
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 62
Re: Am I forgetting anything?
Reply #3 -
05/03/11 at 04:51:04
no chain the bike supposedly only has 5k on it now. The tensioner wasn't falling out last time I was in there at 4k. I was planning on just adding some material to the end of it and drilling a new hole.
Back to top
IP Logged
LS-Rich
Full Member
Offline
If it ain't
broke.... Make it
longer!!
Posts: 109
Omaha, Nebraska
Gender:
Re: Am I forgetting anything?
Reply #4 -
05/04/11 at 07:21:27
Not 100% sure but I don't think you should be using a gasket for your head cover. Use rtv. Cam journals are milled out and it needs to be tighter than what a gasket will let you go.
Back to top
1987 Long Savage, 2006 crf450r
IP Logged
IN-S40
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 128
Michigan City, IN
Gender:
Re: Am I forgetting anything?
Reply #5 -
05/04/11 at 11:22:38
sounds like my last shopping list, side cover gaskets, cylinder base gasket, rings and valve seals.... mine is smoking at startup too... just waiting on some crappy weather to pull the engine and get to work on it!!
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Am I forgetting anything?
Reply #6 -
05/05/11 at 04:22:36
LS-Rich wrote
on 05/04/11 at 07:21:27:
Not 100% sure but I don't think you should be using a gasket for your head cover. Use rtv. Cam journals are milled out and it needs to be tighter than what a gasket will let you go.
I overlooked that part.. absolutely,, No Gasket up there & be really careful where the Goop goes. The manual calls for a particular kinda gasket seal goo, but I cant name it right now.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Russ130
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 62
Re: Am I forgetting anything?
Reply #7 -
05/05/11 at 04:50:13
I believe it was 3 bond that the manual calls for. I know that you need to have the rtv or 3 bond right up against the cam bearing but I think for the rest a gasket will be fine. I was planning on coating the entire gasket with the gray rtv before installing it too. I figure it can't hurt to try and if it doesn't work then fixing it is pretty simple anyhow.
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Am I forgetting anything?
Reply #8 -
05/05/11 at 05:05:50
Yea, 3 bond,, thats it..
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
LS-Rich
Full Member
Offline
If it ain't
broke.... Make it
longer!!
Posts: 109
Omaha, Nebraska
Gender:
Re: Am I forgetting anything?
Reply #9 -
05/05/11 at 08:05:11
Russ130 wrote
on 05/05/11 at 04:50:13:
I believe it was 3 bond that the manual calls for. I know that you need to have the rtv or 3 bond right up against the cam bearing but I think for the rest a gasket will be fine. I was planning on coating the entire gasket with the gray rtv before installing it too. I figure it can't hurt to try and if it doesn't work then fixing it is pretty simple anyhow.
Seriously. No gasket. The whole head cover needs to sit as close as possible. Putting a gasket anywhere on the cover will hold the cover up too high for the cam to seat properly.
Back to top
1987 Long Savage, 2006 crf450r
IP Logged
Russ130
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 62
Re: Am I forgetting anything?
Reply #10 -
05/06/11 at 05:36:45
OK gotcha that certainly explains why the factory didn't use a gasket then. I did think of something else though, oil filter and oil.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/25/24 at 00:23:26
›
General Category
›
Rubber Side Down!
› Am I forgetting anything?
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.