SuzukiSavage.com - Need help separating...

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Need help separating...

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Need help separating... (Read 108 times)

Edgar Senior Member Offline Are you a lucky little lady in the city of light? Posts: 353 San Diego	Need help separating... 04/29/11 at 14:54:03 The header pipe from the muffler. Don't want to damage the header pipe so I'm asking before going further
Back to top	Stay Frosty. IP Logged

BuckRYCA Senior Member Offline Posts: 258 New London, CT, USA Gender:	Re: Need help separating... Reply #1 - 04/29/11 at 15:10:13 What worked for me was repeated applications of PB Blaster into the joint over several days and repeated and careful tappings with a plastic-faced hammer. Soak that joint in PB Blaster, but don't do it inside as it has quite an odor.
Back to top	'96 Savage - now a Ryca CS-1 IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Need help separating... Reply #2 - 04/29/11 at 15:45:27 Throw a couple pieces of wood on the ground to support and prevent scratches. You might want to make a cradle for the header, just round it a bit to match the pipe. Lay it down and step on joint. Rotate and repeat.
Back to top	Versey's Place Tech Section Index IP Logged

topgunz1 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 34 Baton Rouge, LA Gender:	Re: Need help separating... Reply #3 - 04/29/11 at 17:22:09 Glad I'm not the only one that had this issue. What worked for me was repeated banging of the entire assembly on the ground... Good thing about a project bike is you don't have to be gentle with the parts your getting rid of!
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Need help separating... Reply #4 - 04/29/11 at 19:09:25 Id get that clamp all the way off.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home