Very nice!  I really like the back end but the front is too stock.  Here's those same signals modified with lamp parts from Home Depot on the front.

The gaitors are automotive fork boots from Summit Racing through Ebay.  Under $3 each,

I added a ground wire to the signals by bolting it to the base.  That connects to the b&w wire.  Then test the other two wires to see which one lights up the brightest, that's your turn signal lead.  The other is the running light lead.  I believe the running light connects to the gray wire and the signals connect to a green on the right and black on the left.

The wires run through a bit of threaded tube that I got at Home Depot.  The tube gets put through the stock mounts and held in place with the matching nut.  (You need to get the tubes and nuts together in the lighting section because they aren't a standard size.)