SuzukiSavage.com - Different bars?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Different bars?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Different bars? (Read 121 times)

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Different bars? 03/18/11 at 14:16:02 Looking at possibly switching out the bars I have and have questions about what will fit. I know the stock drag bars on my 05 are 1" Found these "Chubby" Z-Bars on eBay and they state the grip section is 1" so do you think they would fit?
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: Different bars? Reply #1 - 03/18/11 at 14:36:03 From the widest outside point of one bar mount to the widest point on the other is just a bit more that 5 inches. You could take a file to the mounts.
Back to top	Travel kills ignorance. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Different bars? Reply #2 - 03/18/11 at 14:41:13 The bar clamps have to fit inside the 5" in the center of the bars. Take a measurement.
Back to top	Versey's Place Tech Section Index IP Logged

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Re: Different bars? Reply #3 - 03/18/11 at 14:43:24 Thanks for those replies, does the 7.25" give enough room for the controls/grips?
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

Edgar Senior Member Offline Are you a lucky little lady in the city of light? Posts: 353 San Diego	Re: Different bars? Reply #4 - 03/18/11 at 15:21:08 Yup it's enough room But u will have to file down the pins on the controls
Back to top	Stay Frosty. IP Logged

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Re: Different bars? Reply #5 - 03/18/11 at 15:39:03 Thanks! Those look SICK on there! Do you have it back together yet?
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

EJID Serious Thumper Offline Work to ride and ride to work. Posts: 1536 Pocatello, ID Gender:	Re: Different bars? Reply #6 - 03/18/11 at 15:44:22 These are another set that I'm looking at: 23-1/4" Wide 8-3/4" Rise 6 1/2" Pullback 7-1/4" Center Width 1" Diameter
Back to top	05 S40 15" Memphis Slim, FXDWG Bars, Moved Rear Signals, Saddlebags, Fork Bag, Mini-Tach, Raptor, Cone Filter, Fishtail Muffler, Mix Screw Out 2.5 Turns, 4" Fwd Controls, 147.5 Main/55 Pilot @ 4500 IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: Different bars? Reply #7 - 03/18/11 at 15:52:27 EJID wrote on 03/18/11 at 14:43:24: Thanks for those replies, does the 7.25" give enough room for the controls/grips? Here, print this out, because it sounds like you don't have anything to measure with.
Back to top	Travel kills ignorance. IP Logged

Edgar Senior Member Offline Are you a lucky little lady in the city of light? Posts: 353 San Diego	Re: Different bars? Reply #8 - 03/18/11 at 15:58:31 EJID wrote on 03/18/11 at 15:39:03: Thanks! Those look SICK on there! Do you have it back together yet? Not yet, took the pic just to show ya! haha. I'm trying like hell to figure out ways to get my solo seat mounted before I give up and have to have a shop fab me some sort of mount or something. darn my limited skills!
Back to top	Stay Frosty. IP Logged

Wolfman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 664 SW Missouri Gender:	Re: Different bars? Reply #9 - 03/19/11 at 00:26:59 Speaking of bars, anyone ever taken the buckhorns off an ls650 and replaced the drag bars on an s40. Leaveing the risers from the s40 in place to give a lil more pullback and rise? If so, got pics? Of course the control cables will have to be replaced im sure.
Back to top	IP Logged

PerrydaSavage Serious Thumper Alliance Member Offline Riding "The Rock"! Posts: 3522 Republic of Newfoundland Gender:	Re: Different bars? Reply #10 - 03/19/11 at 04:02:41 Love the look of Z-bars! Those chubbies are the Bomb!
Back to top	Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes! IP Logged

Demin Serious Thumper Offline We need more chlorine in the gene pool Posts: 2435 Warren,Ohio Gender:	Re: Different bars? Reply #11 - 03/19/11 at 05:22:43 Yep,they'll fit.Had'em on my Savage to see how they looked.I bought them for this build though.Notice the Savage risers on a Harley .
Back to top	Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE finish '77 Yamaha XS650 bobber Bought another one finish'79 Harley custom bobber(NEXT) IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home