SuzukiSavage.com - mixture screw

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › mixture screw

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

mixture screw (Read 464 times)

CalisOsin Senior Member Offline Rather die, than live down on my knees. Posts: 297 Orange County, Ca Gender:	Re: mixture screw Reply #15 - 05/05/11 at 15:13:53 It's hard for me to spot in the diagram, but is this the right part number? 13269-37400
Back to top	'97, k&n airfilter, bcb pipe, custom leather seat, monoshock, custom bars IP Logged

thespot413

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 18
WMASS, MA
Gender: male

Re: mixture screw
Reply #16 - 05/14/11 at 05:38:50

Thanks for the input guys, got it out and the new one in. But when adjusting the screw I found the I was able to turn it all the way in and was still running rich. So I put the stock idle jet back in and it ran good for a while but now its running like crap. Think my 155 main jet is too big? I was thinking of going down to a 152/153 or something.

IP Logged

Routy

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 2280
Winston Oregon
Gender: male

Re: mixture screw
Reply #17 - 05/14/11 at 06:47:44

thespot413 wrote on 05/14/11 at 05:38:50:

So I put the stock idle jet back in and it ran good for a while but now its running like crap. Think my 155 main jet is too big?

Anytime you have inconsistent running, it wouldn't be any solid state component like a main jet causing it. If the carb is for sure clean, then look for any part of the carb that will move, like an idle screw, or the metering rod slide, or the float valve assy.

Rich
'07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055)

IP Logged

thespot413 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 18 WMASS, MA Gender:	Re: mixture screw Reply #18 - 05/14/11 at 06:58:37 Had the carb apart yesterday and its clean as a whistle. It runs great when I'm cruising the problem arises when I close the throttle like coming to a stop. It almost dies so I have to keep it reved up a bit so it won't die.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: mixture screw Reply #19 - 05/14/11 at 11:51:45 Try raisin the idle?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

thespot413 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 18 WMASS, MA Gender:	Re: mixture screw Reply #20 - 05/14/11 at 12:11:17 Ya, I gotta ride it home in an hour so ill try. I thought it was up close but ill double check with the audiocity program or whatever it is
Back to top	IP Logged

thespot413 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 18 WMASS, MA Gender:	Re: mixture screw Reply #21 - 05/14/11 at 13:30:49 Idle screw did nothing. This is really beyond me. Lancer any ideas man? I just turned the air idle mixture screw all the way in and she's still spitting black smoke at me. The only thing I can think of is smaller jet?
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home