verslagen1
YaBB Moderator ModSquad
Offline
Where there's a will, I want to be in it.
Posts: 28884
L.A. California
Gender:
|
Jan, either you put the carb together wrong or you have the wrong main jet. Idle jet ok.
1. Try cleaning the carb again, I remember my 1st time didn't go smoothly either. Repeat clean and reassemble carefully, use the diagrams and make everything is in the right place.
2. Look at the original jet and the new one. What numbers are they? Dynojet uses a different numbering system, but someone may be able to say it's right or wrong. Look at the holes in them, which is bigger, that's the one to use. And if in doubt, try the original to see if it gets better.
Always a good way to figure out what's wrong, start with what you know works and only change one thing at a time.
|