Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› rebuilding brakes- question about union bolt
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
rebuilding brakes- question about union bolt (Read 42 times)
sbaugz
Ex Member
rebuilding brakes- question about union bolt
02/27/11 at 15:01:49
So I took my brakes completely apart and cleaned them. Replaced the pads and am now getting ready to put it all back together. My question is regarding the union bolts - there are two of them. One attaches the brake line to the master cylinder and the other attaches it to the caliper. My question is regarding how they line up with the brake line. The union bolt is hollow and has two exit holes along the threads. The brake line fittings also have corresponding holes too. How do you make sure these line up when you tighten them down?
Back to top
IP Logged
MotoBuddha
Serious Thumper
Offline
Let's roll!
Posts: 1416
Charlotte, NC
Re: rebuilding brakes- question about union bolt
Reply #1 -
02/27/11 at 15:45:02
If you look at the inside of the banjos on the ends of the brake line, you'll see they're concave. That means
you don't need to worry about lining anything up.
Fluid will come out the holes in the master cylinder bolt, flow around the inside of the banjo to the brake line, down to the banjo on the caliper end where it flows into the banjo, into the holes in the bolt, then into the caliper. So just tighten the bolts (assuming the copper washers are in good shape) and then bleed the system.
Back to top
Travel kills ignorance.
IP Logged
sbaugz
Ex Member
Re: rebuilding brakes- question about union bolt
Reply #2 -
02/27/11 at 16:39:43
ahh, thanks. Makes sense.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/23/24 at 18:26:29
›
General Category
›
Rubber Side Down!
› rebuilding brakes- question about union bolt
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.