SuzukiSavage.com - Voltage regulator relocation

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Voltage regulator relocation

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Voltage regulator relocation (Read 154 times)

Jimmer Senior Member Offline SuzukiSavage.com Rocks! Posts: 497 NewportPa. Gender:	Voltage regulator relocation 02/25/11 at 15:13:53 Where can I relocate the voltage regulator too. I want to remove the rear passenger seat and install a fender bib , I have all ready installed a solo seat and have a K&N air filter and carb mod, I no longer have the air filter box. So where can I install the regulator and still offer it some protection?
Back to top	IP Logged

Demin Serious Thumper Offline We need more chlorine in the gene pool Posts: 2435 Warren,Ohio Gender:	Re: Voltage regulator relocation Reply #1 - 02/25/11 at 15:19:39 Mine is mounted right between the frame rails.Won't hurt it out in the open.They're a sealed unit.Intruders have them mounted at the bottom of the bike right above the exhaust.
Back to top	Next project:finish '87 Savage custom/bobber/CHOP STYLE***DONE finish '77 Yamaha XS650 bobber Bought another one finish'79 Harley custom bobber(NEXT) IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28644 Tucson Az Gender:	Re: Voltage regulator relocation Reply #2 - 02/25/11 at 15:23:43 Anywhere that allows the fins to get air... Mine's under the front of the seat, (room there because of 2" seat lift)...
Back to top	Ludicrous Speed !... ... ... IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Voltage regulator relocation Reply #3 - 02/25/11 at 22:45:05 Rectifier wizdom... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1295745373 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1258478874 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1236224102/4#4 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1207086871
Back to top	Versey's Place Tech Section Index IP Logged

Jimmer Senior Member Offline SuzukiSavage.com Rocks! Posts: 497 NewportPa. Gender:	Re: Voltage regulator relocation Reply #4 - 02/26/11 at 04:55:45 Thanks for the information, these will really help.
Back to top	IP Logged

TheSnakeLady Full Member Offline Thumpers Rule!!! Posts: 152 Central New York Gender:	Re: Voltage regulator relocation Reply #5 - 02/26/11 at 05:36:13 Actually I'm in the middle of the same project, could someone who has "dropped it into the airbox" please post some pics. I'm wondering if/what you cut to get it in there and also did you mount it or just "leave it hanging" and did you ground it? Thanks, any help would be much appreciated!!!
Back to top	My ride is a 2005 LS650, customized with ISO grips, cone air filter, stage 1 jets, Jardine exhaust, solo seat, AM turn sigs, and a catseye tail light. Next year, custom paint job (hopefully)! IP Logged

Savage_Amusement Serious Thumper Offline On this steel horse I ride. Posts: 1004 Omaha, NE Gender:	Re: Voltage regulator relocation Reply #6 - 02/27/11 at 07:09:12 Mine is exactly where they put it in the 4th post in those links above and has been there for 3 years with out a single problem. Fits perfectly in there. I drilled that bracket first then had it powder coated to keep the holes from getting rusty, and used stainless bolts as well.
Back to top	2K5, 1975 Sportster tank, blacked out motor, K&N cone, Much more to come later!! IP Logged

jrm8486 FSO X2 Serious Thumper Offline ride it like you stole it! Posts: 574 Spring Hill FL. Gender:	Re: Voltage regulator relocation Reply #7 - 02/27/11 at 08:49:03 Just zip tied mine on the inside of the air box,went with cone filter.this is my 2nd savage I've done this with and never had any problems.
Back to top	IP Logged

TheSnakeLady Full Member Offline Thumpers Rule!!! Posts: 152 Central New York Gender:	Re: Voltage regulator relocation Reply #8 - 02/27/11 at 09:51:17 I got it all done now, thanks all!
Back to top	My ride is a 2005 LS650, customized with ISO grips, cone air filter, stage 1 jets, Jardine exhaust, solo seat, AM turn sigs, and a catseye tail light. Next year, custom paint job (hopefully)! IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home