SuzukiSavage.com - Cone Filter set up

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Cone Filter set up

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Cone Filter set up (Read 93 times)

ocdave Ex Member	Cone Filter set up 01/05/11 at 14:30:30 I picked up a K&N cone filter that I plan on installing on my project Savage. From reading some prior threads I have seen a few cone filters set up with a PVC extension. Is this purely cosmetic? Is there any increased performance that can be gained by extending the filter away from the carb, perhaps in a different direction?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Cone Filter set up Reply #1 - 01/05/11 at 14:38:24 You want to have an extention as long as the rubber duct between the carb and airbox. This will allow the flow to stabilize before entering the throat of the carb. It will improve low rpm response. If you want a shorter duct you will need to add a flow straightener. See Diamond Jim's turbulator.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home