SuzukiSavage.com - fork neck

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › fork neck

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

fork neck (Read 89 times)

ROB CYCLE Junior Member Offline SuzukiSavage.com Rocks! Posts: 53	fork neck 12/19/10 at 15:29:04 can anyone tell me the fork neck size?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: fork neck Reply #1 - 12/19/10 at 15:45:39 Big enough to eat a savage spindle. What measurement do you need?
Back to top	Versey's Place Tech Section Index IP Logged

ROB CYCLE Junior Member Offline SuzukiSavage.com Rocks! Posts: 53	Re: fork neck Reply #2 - 12/20/10 at 13:09:31 is the neck a 1 inch or 7/8 want to add springer forks
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: fork neck Reply #3 - 12/20/10 at 13:25:04 The spindle is 1.015" in diameter.
Back to top	Versey's Place Tech Section Index IP Logged

MotoBuddha Serious Thumper Offline Let's roll! Posts: 1416 Charlotte, NC	Re: fork neck Reply #4 - 12/20/10 at 13:43:35 And the bearing sizes are: Upper: 25 x 47 x 15 Lower: 30 x 55 x 17
Back to top	Travel kills ignorance. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home