SuzukiSavage.com - Need some measurements please

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Need some measurements please

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Need some measurements please (Read 145 times)

smokin_blue Serious Thumper Offline From Cafes to Streetfighters! I build them all! Posts: 830 St. Paul, MN Gender:	Need some measurements please 11/27/10 at 21:23:38 I sold my stock front rim a couple of years ago so I am hoping someone can help me out. I am in need of 3 measurements on a front stock brake rotor. 1. outside diameter of rotor 2. inside diamter of rotor 3. bolt circle diamter (that would be the distance across from one mounting hole to the other opposite it) Thanks!! Smokin_blue
Back to top	My website http://street-unique.com IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Need some measurements please Reply #1 - 11/27/10 at 21:32:12 Buy a used disk & measure it out..?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: Need some measurements please Reply #2 - 11/27/10 at 21:47:57 10.25" OD 3 7/16" ID 4.25" B.C. Roughly, I can measure it more accurately if you want.
Back to top	Versey's Place Tech Section Index IP Logged

markbacon

YaBB Newbies

Offline

I love YaBB 1G -
SP1!

Posts: 41
New Zealand
Gender: male

Re: Need some measurements please
Reply #3 - 11/29/10 at 15:20:44

I have a dxf file that I did to get a new disk cut, but can't get it to upload.

I got the dimensions you're after from an online PDF Goldfren catalogue, which listed them in mm as:

204-001F
SIDE
O.D. 260.3mm
H.D. 107.8mm
I.D. 87.3mm
THK. 4.7mm

The DXF I drew based on these worked perfectly for getting a replacement disk made.

Use 10mm as diameter for bolt holes, and plan to re-use the standard bolts - they've got an 8mm thread but a 10mm shank to fit sockets in hub.

IP Logged

smokin_blue Serious Thumper Offline From Cafes to Streetfighters! I build them all! Posts: 830 St. Paul, MN Gender:	Re: Need some measurements please Reply #4 - 12/02/10 at 11:46:41 Thanks guys! the dims were great. showed me the disc wouldn't mod out for where I wanted to put it.
Back to top	My website http://street-unique.com IP Logged

smokin_blue Serious Thumper Offline From Cafes to Streetfighters! I build them all! Posts: 830 St. Paul, MN Gender:	Re: Need some measurements please Reply #5 - 12/07/10 at 05:58:11 that is a great catalog! it is a searchable PDF so you can find the specs for your disc and then see if any others have say the same ID or Bolt hole size.... thanks a bunch!
Back to top	My website http://street-unique.com IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home