Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› LS 650 S40 engine rebuild/blueprinting shop
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
LS 650 S40 engine rebuild/blueprinting shop (Read 793 times)
gerald.hughes
Serious Thumper
ModSquad
Offline
FSO
Posts: 1100
Tucson, Az
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #15 -
11/13/10 at 07:19:25
I took my flea flicker to a performance shop here in Tucson that has a yard full of superbikes, and a wall full of racing trophies and plaques. I talked with the guys about how I ride, and what I was looking to have done. They didn't sneer. They thought that it was cool. the dyno specs that Serowbot posts on this site are the ones that they ran when they finished relieving the head, doing a ring and valve job, and installing Lancer's chain and Verslagen's tensioner. (Serowbot did the carb work.)
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #16 -
11/13/10 at 09:01:53
Would you be willing to share with us what that bit of expert work cost?
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
gerald.hughes
Serious Thumper
ModSquad
Offline
FSO
Posts: 1100
Tucson, Az
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #17 -
11/13/10 at 09:51:02
Parts, labor, and the dyno run-I believe that it was around $1500. Just for giggles, I went to the local stealership, and told them the work that I wanted done and got a price-almost $3000.
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #18 -
11/13/10 at 10:58:35
Beats heck outta 3,000 but 1500's nothing to sneeze at. I spose if someone has the pennies, its no big deal..
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Gyrobob
Serious Thumper
Offline
Posers ain't
motorcyclists
Posts: 2571
Newnan, GA
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #19 -
11/14/10 at 05:15:22
Lancer, tell us more about the chain coversion
Back to top
If you think there's good in everyone, you haven't met everyone.
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #20 -
11/14/10 at 06:49:15
chain conversion...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1174239333/0
Back to top
Versey's Place
Tech Section Index
IP Logged
MotoBuddha
Serious Thumper
Offline
Let's roll!
Posts: 1416
Charlotte, NC
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #21 -
11/20/10 at 21:32:19
I'm brand new to the LS650 (but not bikes) so I'm trying to figure out what can be done with the engine. My searching here so far hasn't turned up what I'm looking for. I assume the LS650 has a lot in common with the DR650. There are high compression pistons, big bore kits, hot cams and pumper carbs available for that. Anyone know if this stuff works with the LS?
Back to top
Travel kills ignorance.
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28886
L.A. California
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #22 -
11/20/10 at 21:59:43
The piston kits from wiseco will fit if you bore out the cylinder.
I imaging the carbs would work. But everything else is different.
Lancer's rex is one of the hottest bikes around...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1266928992/0#0
There's also truckinduc's...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1264727267/0
Back to top
Versey's Place
Tech Section Index
IP Logged
Gyrobob
Serious Thumper
Offline
Posers ain't
motorcyclists
Posts: 2571
Newnan, GA
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #23 -
11/29/10 at 18:54:26
With moderate mods (bore, piston, carb, cam), what kind of reliable HP can you expect from this motor?
Back to top
If you think there's good in everyone, you haven't met everyone.
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10664
Oklahoma
Gender:
Re: LS 650 S40 engine rebuild/blueprinting shop
Reply #24 -
11/30/10 at 04:21:35
Gyrobob wrote
on 11/29/10 at 18:54:26:
With moderate mods (bore, piston, carb, cam), what kind of reliable HP can you expect from this motor?
With the large bore piston/cyl you get higher comp too; throw in the cam/carb kits and a really good flowing exhaust system (not the stock header) and a really good tuning job; expect 45hp+
at the rear wheel
; not at the crank
If the exhaust ports in the head are opened then there is another boost
Back to top
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/27/24 at 10:15:28
›
General Category
›
Rubber Side Down!
› LS 650 S40 engine rebuild/blueprinting shop
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.