Those look like the ones I put on my bike. Keep in mind you have to drill out the hole on the board that the bolt goes through to attach it to our clevis. At least on the ones I got our bolt was just "that much" too big to go through.
I also found that even with the alternate angle placement the boards still tilt down at the front a tich too much for me to be truly comfortable. That being said they are still WAY better than riding a 4,200 mile round trip with the stock pegs. I've done it both ways and will never go back.
The rubber pads on these floor boards are thin and the glue holding them is pretty weak. When (not if) the rubber comes off I hope you catch it. I then used a stronger adhesive I got at a big box hardware store and now they stay put. I also eventually made a thicker set of pads with a much better non-skid pattern on them from a welcome mat I picked up at the same store.
Don't know how well they show up, but you can get an idea of how they look on a non-stock Sav.
http://www.bikepics.com/members/jazzcarter/00savage/Jack