SuzukiSavage.com - Carb Screw nightmare

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Carb Screw nightmare

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Carb Screw nightmare (Read 128 times)

TheCaliKid YaBB Newbies Offline Posts: 31 Hollywood, CA	Carb Screw nightmare 10/04/10 at 16:14:40 Well I thought I had it worked out. Set out to do the white spacer mod after checking Auto Decomp & Valve clearances and changing Spark plug. Trying to get the Diaphragm cover off, had my impact driver, new stainless hex screw replacements, a good bit, WD40.....One out, three stuck & stripped. Any ideas? Thanks
Back to top	IP Logged

ralfyguy Serious Thumper Offline Posts: 932	Re: Carb Screw nightmare Reply #1 - 10/04/10 at 16:46:17 Take carb out and try vice grips.
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28657 Tucson Az Gender:	Re: Carb Screw nightmare Reply #2 - 10/04/10 at 17:11:11 ...then once you get'em out replace with allen heads... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

Ed L. Serious Thumper Alliance Member Offline "We All go a Little Crazy Sometimes" Norman Bates Posts: 2808 Sunny Florida Gender:	Re: Carb Screw nightmare Reply #3 - 10/04/10 at 18:00:56 Get on the sides of the screw heads with a small file and file the sides flat so you can get a grip on the screw heads with vice grips. It worked on my carb.
Back to top	Silver '02, clubman handle bars, Cobra headlight, Sportster muffler, K+N stock air filter, 152.5 main, Superbrace, oil cooler, 1/2 inch aluminium plate forward controls, spark advance, goes like stink IP Logged

Phelonius Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1897	Re: Carb Screw nightmare Reply #4 - 10/04/10 at 18:32:10 All Japanese carbs have this problem. They are too cheap to use SS allen heads. I always do mine when the bike is new before the screws grow roots Phelonius
Back to top	Phelonius IP Logged

TheCaliKid YaBB Newbies Offline Posts: 31 Hollywood, CA	Re: Carb Screw nightmare Reply #5 - 10/04/10 at 20:58:31 Operation successful. Getting the carb off was tough, getting it back on....a real pita. Like the idea of putting the Allen Screws on when you get the bike, would have made life so much easier. Thanks all!
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Carb Screw nightmare Reply #6 - 10/05/10 at 05:22:02 Always nice when the OP wins & gives the report.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home