SuzukiSavage.com - spark plug socket question

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › spark plug socket question

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

spark plug socket question (Read 66 times)

Tiefighterpilot Senior Member Offline Daily Rider Posts: 346 San Francisco	spark plug socket question 09/12/10 at 23:28:57 do i need a socket made for spark plug (with magnet)? or can i use a regular socket (deep well)? thanks.
Back to top	2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: spark plug socket question Reply #1 - 09/12/10 at 23:35:18 deep thin wall works fine - pretty tough to get to with the tank on unless you've either taken off the chrome head cover or made youself the swing out cover
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: spark plug socket question Reply #2 - 09/13/10 at 00:38:50 Ifyouhave a problem lifting the plug out after its unscrewed, you can use a spark plug boot, ripped off an old plug wire, ( thats what I use to start them back in, along with some neversieze) or shove the plug wire on it & lift it up. Make sure you blow all the dirt out of that hole before pulling the plug.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

ls650v Junior Member Offline 97 savage Posts: 73 Clinton Twp, MI Gender:	Re: spark plug socket question Reply #3 - 09/13/10 at 03:06:08 And if you don't have an old spark plug boot laying around, a piece of tight fitting fuel line also works.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home