SuzukiSavage.com - Diameter of the shock mounting holes?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Diameter of the shock mounting holes?

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Diameter of the shock mounting holes? (Read 70 times)

8696Savage Junior Member Offline SuzukiSavage.com Rocks! Posts: 63	Diameter of the shock mounting holes? 09/10/10 at 22:05:30 Does anyone know the diameter of the mounting holes (eyes) on the actual shocks, top & bottom for 1996? Not the bushing hole size, but the actual eye holes on the shocks. Thanks!
Back to top	IP Logged

8696Savage Junior Member Offline SuzukiSavage.com Rocks! Posts: 63	Re: Diameter of the shock mounting holes? Reply #1 - 09/11/10 at 20:43:09 I found one. They are 1" top and bottom.
Back to top	IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Diameter of the shock mounting holes? Reply #2 - 09/11/10 at 21:22:07 Not sure your question - I mean the stock shocks have a rubber insert with a bushing in the rubber - the hole is .5625 inch or so - are you wanting the measurement of the inside hole of the rubber or with the rubber knocked out?
Back to top	IP Logged

8696Savage Junior Member Offline SuzukiSavage.com Rocks! Posts: 63	Re: Diameter of the shock mounting holes? Reply #3 - 09/12/10 at 01:41:30 Thanks for your reply. I was able to find one and measure it. With the bushing out it measures 1". The hole in the bushing was like you said. 5/8"
Back to top	IP Logged

Pages: 1

« Home