SuzukiSavage.com - emergency tail light wiring help!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › emergency tail light wiring help!

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

emergency tail light wiring help! (Read 87 times)

relic624k YaBB Newbies Offline keep on thumping! Posts: 19 west houston, tx Gender:	emergency tail light wiring help! 09/03/10 at 08:26:20 ok i am installing a side mount tail light in the process i contacted the white tail light wire and the black wire together on accident i heard a pop and now i have no power at all cant even start up the bike please help! Back to top
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: emergency tail light wiring help! Reply #1 - 09/03/10 at 08:35:24 1st, separate the wht wire from the black. then check your fuse.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: emergency tail light wiring help! Reply #2 - 09/03/10 at 08:36:20 Ya done gone & let the Magic Smoke outta somethin 'lectrical. Gonna need a fuse. Look up under the seat, about where your right thigh is. P.S. Touching wires together while power is on is rarely a good idea. Lets be keepin that to a minimum, okay?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

relic624k YaBB Newbies Offline keep on thumping! Posts: 19 west houston, tx Gender:	Re: emergency tail light wiring help! Reply #3 - 09/03/10 at 11:08:44 problem found it was a blown fuse thanks for the help fellas!
Back to top	IP Logged

T Mack 1 - FSO Serious Thumper Alliance Member Offline sold 2001 LS650 for a 1986 XLH1100 Posts: 2919 Emmaus,Pa Gender:	Re: emergency tail light wiring help! Reply #4 - 09/04/10 at 18:16:45 Tail light, one wire power to the running light (marker), one wire to brake light. One wire to ground. If you're not goig to use one of the wires, just tape it up. If you don't have a volt meter, use another 12volt light bulb as a tester. Or use the old tail lamp.....
Back to top	Engineers design things, Technicians make them work. --- 30% of being mechanical is confidence/30% is knowing to go slow when needed/30% is looking repeatedly at what you have/10% is dumb luck IP Logged

Pages: 1

« Home