SuzukiSavage.com - Needing a right footpeg, can I use aftermarket?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Needing a right footpeg, can I use aftermarket?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Needing a right footpeg, can I use aftermarket? (Read 111 times)

Jive--FSO

Junior Member

Offline

SuzukiSavage.com

Posts: 80
Beckley, WV

Needing a right footpeg, can I use aftermarket?
07/30/10 at 19:49:46

Hello! I am a new motorcycle owner, and got a 2000 Savage as a first bike. The right footpeg was bent, and eventually the metal shaft inside broke in half. I was looking at OEM footpegs, but I'm wondering if there are any aftermarket pegs I can use that are cheaper? $60 for a peg seems a bit steep for the OEM one! For what it's worth, I did try and repair the old one with JB weld, but it held all of 5 minutes!

Thanks!

Jive

IP Logged

Staplebox

Junior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 70
CT
Gender: male

Re: Needing a right footpeg, can I use aftermarket
Reply #1 - 07/31/10 at 19:33:23

If you broke the allen headed 'bolt' that holds the peg in place, and your peg is still good, it may be cheaper to replace just that part. You'll need it anyway. I replaced the front pegs with some Kyurakan (sp) and needed to drill out the pegs a bit to fit the stock bolt.

http://www.mrcycles.com/fiche_section_detail.asp?section=82453&category=Motor...

See #8

IP Logged

Jive--FSO Junior Member Offline SuzukiSavage.com Posts: 80 Beckley, WV	Re: Needing a right footpeg, can I use aftermarket Reply #2 - 08/01/10 at 20:33:51 Thanks for the reply! The allen head bolt is still good, but the metal peg that slips into the rubber had bent, and eventually broke. I may have fixed it with some JB weld and some metal bracing over the break. Jive
Back to top	IP Logged

Staplebox Junior Member Offline SuzukiSavage.com Rocks! Posts: 70 CT Gender:	Re: Needing a right footpeg, can I use aftermarket Reply #3 - 08/01/10 at 20:51:50 You should post over in the market looking for a right foot peg. I broke my right one (reason for replacing them all) and recently sent someone the left one for $0. You may get lucky and find a cheap one. Or try ebay.
Back to top	IP Logged

kel30734 Senior Member Offline Dragon Rider Posts: 486 Calhoun, GA Gender:	Re: Needing a right footpeg, can I use aftermarket Reply #4 - 08/02/10 at 07:38:53 Cheep Fix.......... Harly rubber take off's Just gave to drill out the hole a littleso it will fit the Sholder bolt..... I use them and keep a spare pair in my saddle bags, Peg scraping is fun
Back to top	IP Logged

Hashbrown

Full Member

Offline

What can brown do
for you!

Posts: 235
Nashua, NH
Gender: male

Re: Needing a right footpeg, can I use aftermarket
Reply #5 - 08/02/10 at 07:44:19

kel30734 wrote on 08/02/10 at 07:38:53:

Cheep Fix.......... Harly rubber take off's Just gave to drill out the hole a littleso it will fit the Sholder bolt.....

I use them and keep a spare pair in my saddle bags, Peg scraping is fun

Kel i was thinking of doing this mod to my pegs. will any male mount harley peg work. i have the stock peg off and i see it looks different then the harley. has that weird looking hook at the end while the harley is just a male mount with a hole in it.

What can brown do for you!

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home