SuzukiSavage.com - white spacer mod issues

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	white spacer mod issues 06/23/10 at 18:45:42 i did my spacer mod with stock exhaust and air filter and it just flooded my engine so nowam scredd to rejet.i wanna drill holes in baffle so ican be heard on I10 410 i35 i live in heavily populated area and have had way to many close calls the muffler needs to louder.could i use a savage muff from the 80's no rejetting got a 06
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: white spacer mod issues Reply #1 - 06/23/10 at 20:43:15 quick leaner take out the snorkel or take off the airbox door.
Back to top	Versey's Place Tech Section Index IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #2 - 06/23/10 at 20:52:50 what is the snokler and if i take off the airbox door will it make it leaner
Back to top	IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #3 - 06/23/10 at 20:55:22 my friend also said i can use conduit put a capeon it drilla hole bigger than the one on the baffle on the cap slip over and clamp to muffler it will increase sound but will that make to much backpressure
Back to top	IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #4 - 06/23/10 at 20:56:42 typo ?????????
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: white spacer mod issues Reply #5 - 06/23/10 at 21:06:31 texsam wrote on 06/23/10 at 20:52:50: what is the snokler and if i take off the airbox door will it make it leaner the snorkel it the rubber tube that hangs down in the airbox. yes.
Back to top	Versey's Place Tech Section Index IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #6 - 06/23/10 at 22:07:33 that will increace back pressure the conduit correct, and do the snorkle or airbox for spacer mod correct?or can i do airbox mod without making it leaner thnx 4 info
Back to top	IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #7 - 06/23/10 at 22:10:53 will it be to much backpressure even if i increase the holes????
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: white spacer mod issues
Reply #8 - 06/23/10 at 22:36:29

Quote:

i did my spacer mod... and it just flooded my engine so now am scared to rejet.

So like what are you saying? you did the white spacer mod and you f'd up and now the engine floods? Cause why? Did you put it back together wrong? Did you fix it? I figured that it's over rich cause of the white spacer mod and you need to make it leaner. Which can be done by taking out the snorkel for a little bit leaner or taking off the door for a whole lot leaner.
Quote:

i wanna drill holes in baffle to make the muffler louder.

yes, drilling holes in the muff will make it louder.
Quote:

could i use a savage muff from the 80's no rejetting, got a 06

yes you can use a muff from an '80's, it's the same mouse fart muff. You want something louder, search for dyna muff.

Back to top

Versey's Place
Tech Section Index

IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #9 - 06/23/10 at 22:43:10 i'll do that thank u.ne thoughs bout the conduit??
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: white spacer mod issues
Reply #10 - 06/23/10 at 22:49:25

texsam wrote on 06/23/10 at 20:55:22:

my friend also said i can use conduit put a capeon it drilla hole bigger than the one on the baffle on the cap slip over and clamp to muffler it will increase sound but will that make to much backpressure

I don't 'speak' pigeon English very well... but if you increase sound, most of the time you reduce backpressure.

search hartman mod
also drill muff
it's been done.

Back to top

Versey's Place
Tech Section Index

IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #11 - 06/23/10 at 22:57:04 i was thinking the baffles is in perf condition,i though it kinda echos amplifying noise the only mod is sliping on a piece conduit at end of baffle put bout 3/4 in hole the cap on the conduit slip over muffler no mods on muff. would that change backpressure
Back to top	IP Logged

texsam Full Member Offline SuzukiSavage.com Rocks! Posts: 138	Re: white spacer mod issues Reply #12 - 06/23/10 at 22:59:15 by my train of thought it increase before decreasin back pressure you/???????????????????????
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28884
L.A. California
Gender: male

Re: white spacer mod issues
Reply #13 - 06/23/10 at 23:51:25

texsam wrote on 06/23/10 at 22:57:04:

i was thinking the baffles is in perf condition,i though it kinda echos amplifying noise the only mod is sliping on a piece conduit at end of baffle put bout 3/4 in hole the cap on the conduit slip over muffler no mods on muff. would that change backpressure

Since you don't seem to be modifying the existing muff in any way other than shoving a tube up it rear, give it a try. Don't think it'll work.

Back to top

Versey's Place
Tech Section Index

IP Logged

texsam

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 138

Re: white spacer mod issues
Reply #14 - 06/24/10 at 00:05:39

what doyou think for muffler mod
not gonna use a kazoo just a hole bigger than the baffle whole,but back pressure on car is same as bike?????? its a tin can

Step 1: Consume contents - Low GI energy drink will increase driver performance.
Step 2: Remove green wrapping - you don't want people knowing you paid that much for it. Additionally, wrapping may be flammable... you can polish it at this point if you wish.
Step 3: Cut out a hole big enough to fit over current muffler tip. Weld here.
Step 4: Attach a kazoo inside other end of 'new muffler'... airflow will pass through this unit and provide additional meaty soundzzzzzzz...

sounds good onmy bike don't change performance.opinions please

Back to top

IP Logged