Routy
Serious Thumper
Offline
SuzukiSavage.com Rocks!
Posts: 2280
Winston Oregon
Gender:
|
Some claim to do it w/o taking the tank off,...good luck. Take the top cover off the carb, and remove the plunger that contains the needle/spacer assy. Caution,.....!! don't mess up the heads on those tiny little philip screws that hold the needle/spacer in the plunger. They are very tight, and require a good proper fitting driver w/ lots of body weight, or a "mini" impact driver to loosen them. I will add this from my personal experience,...... If you are doing a 1/2 spacer mod to improve a ragged running low end 1/4 throttle situation, you are right on track. But if you are doing it only to lessen deceleration backfire, get prepared for a big disappointment !
|