Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Air/Fuel Mixture (brass) screw replacement
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Air/Fuel Mixture (brass) screw replacement (Read 98 times)
Tiefighterpilot
Senior Member
Offline
Daily Rider
Posts: 346
San Francisco
Air/Fuel Mixture (brass) screw replacement
06/09/10 at 10:08:11
Anyone know how the brass screw can be replaced?
Back to top
2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise
IP Logged
ratz
Junior Member
Offline
Wait.......what??
Posts: 92
Alabama Gulf Coast
Gender:
Re: Air/Fuel Mixture (brass) screw replacement
Reply #1 -
06/09/10 at 11:41:00
Does yours seem to be seized?
I ran into that with mine,turns out there was loctite on the threads.I soaked it with acetone and carefully worked it back and forth until it turned easily.
Of course,I didn't know the screw was loctited until I had chewed the slot up on it pretty well,so when I did get it out,I had to cut a new slot in it.Fortunately the head is fairly thick,so I got by with it.
I know I could have bought a replacement,but where's the fun it that?
Back to top
IP Logged
Bubba
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 956
Denver, CO
Gender:
Re: Air/Fuel Mixture (brass) screw replacement
Reply #2 -
06/09/10 at 11:49:16
try here...
http://www.ronayers.com/ProductDetails/N/687/SKU/187410
Back to top
'06 lt Blue, Dyna Power pipe, air screw 2 1/4 turns, 52.5 pilot w/ bleed holes, 150 Main, 2/3 spacer, Pirelli MT66 tires, Raptor petcock, 412-4006 Progressive shocks
IP Logged
Tiefighterpilot
Senior Member
Offline
Daily Rider
Posts: 346
San Francisco
Re: Air/Fuel Mixture (brass) screw replacement
Reply #3 -
06/09/10 at 12:13:51
I am not sure if it is loctited or not, but it only turns out 2 turns. But since it turn, think it is not. I know from reading on the forum that people are turning it out over that.
My screw is pretty chewed up now, so I will removing it using acetone and see if I can put a new slot or get a new screw. Thanks for the information.
Back to top
2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise
IP Logged
earlytimz
Senior Member
Offline
Savage model 417
(4 speed, 17mm)
Posts: 382
BG, KY
Gender:
Re: Air/Fuel Mixture (brass) screw replacement
Reply #4 -
06/09/10 at 17:45:14
Mine was the same way. I think the glue, or whatever holds the brass plug in, was preventing the screw from turning more than a little over 2 turns out. I soaked it with WD-40 and worked the screw in and out while trying not to mess up the slot or the threads. I did this on a few different occasions, it finally loosened up and has been fine ever since...
I couldn't even get mine out to replace it if I had wanted to.
Back to top
IP Logged
Tiefighterpilot
Senior Member
Offline
Daily Rider
Posts: 346
San Francisco
Re: Air/Fuel Mixture (brass) screw replacement
Reply #5 -
06/09/10 at 18:24:23
so were you able to get it out now? I prob will need to in order to create a new slot.
earlytimz wrote
on 06/09/10 at 17:45:14:
Mine was the same way. I think the glue, or whatever holds the brass plug in, was preventing the screw from turning more than a little over 2 turns out. I soaked it with WD-40 and worked the screw in and out while trying not to mess up the slot or the threads. I did this on a few different occasions, it finally loosened up and has been fine ever since...
I couldn't even get mine out to replace it if I had wanted to.
Back to top
2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise
IP Logged
earlytimz
Senior Member
Offline
Savage model 417
(4 speed, 17mm)
Posts: 382
BG, KY
Gender:
Re: Air/Fuel Mixture (brass) screw replacement
Reply #6 -
06/09/10 at 18:27:59
Yeah, now I can. I was careful (& lucky) to not booger up the slot very badly, so I'm golden...
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/21/24 at 01:36:45
›
General Category
›
Rubber Side Down!
› Air/Fuel Mixture (brass) screw replacement
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.