aphico
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 30
|
thanx, for all the advice, with the plug out it will roll forward and i can hear the piston going. when the plug is in it won't go forward. even in fourth gear the rear wheel just slides. it will roll backward, but not forward. I know that doesnt sound right, but if any one would like to try? i've been pushing this little thing up the hill now for a couple of days, (it's really not that light)
I read on another post, that there are two washers for the starter, and since i didn't remove it, i'm wondering if they fell in the hole? I tried to look in there with a mirror, but know luck, and i'm a little concerned with taking the case off, I don't have a service manual, and this is my first time on this bike. i'm going to poke around in there with a flexible magnet and see if i can fish anything out.
I'm hoping it's the compression release, but the batter is fully charged 12.9 on my meter anyway, and i don't hear anything when i hit the start button. I found the compression release under the tank wires look good, and so does the cable. i pulled on the cable, it didn't move. i was going to jump 12v to it, but alittle worried about that as well. I'll take picks of the parts i get, and hopefully all you great people will walk me through this. I gottal feeling i'm going to be an expert by the time i get this thing going. thanx again.
|