SuzukiSavage.com - Does anybody know about squish

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Does anybody know about squish

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Does anybody know about squish (Read 75 times)

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Does anybody know about squish 05/31/10 at 09:16:25 Do any of you engineering types out there have any input for me on what squish clearance I should run on KLX if not, savage numbers will do. Clive W
Back to top	IP Logged

mikelhsr1982 Full Member Offline Who turned up the heat Posts: 150 WV Gender:	Re: Does anybody know about squish Reply #1 - 05/31/10 at 09:29:41 Im real slow to some things, but do the savage and KLX have similarities? When I google the LS 650 it sometimes KLX results.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28782 L.A. California Gender:	Re: Does anybody know about squish Reply #2 - 05/31/10 at 09:37:11 the savage compression ratio is about 8.5 isn't the klx about 10? The bore and stroke on the savage 94x94 and klx something else. So squish is apt to be something else. If you're shaving the head/cylinder, lancer the only one I know to have done it.
Back to top	Versey's Place Tech Section Index IP Logged

klx650sm2002

Serious Thumper

Offline

The more I learn the
less I know.

Posts: 2041
Cumbria,England
Gender: male

Re: Does anybody know about squish
Reply #3 - 05/31/10 at 09:53:50

My KLX is 100x83 and 9.5:1 cr and she revs to 7500 not 6500 so squishes would be within 0.001". I've done a lot of research and the best I can find is that safe is 0.05", but with squish it is best to be as small as poss without touching, that is what I'm asking.
Thanks guys.
Clive W

ps
Valve sizes are KLX 37mm inlet 32mm exhaust. Savage 33mm inlet 28mm exhaust.

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28782 L.A. California Gender:	Re: Does anybody know about squish Reply #4 - 05/31/10 at 10:01:10 Put some clay on top of the piston equal to the amount of clearance you're supposed to have then crank it thru by hand to see if you really have that much clearance.
Back to top	Versey's Place Tech Section Index IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Does anybody know about squish Reply #5 - 05/31/10 at 10:31:42 I did the squish on my 350LC 0.04" was good, 0.035" was a little tight, stopped it forming carbon. Clive W
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10606 Oklahoma Gender:	Re: Does anybody know about squish Reply #6 - 05/31/10 at 14:31:30 I am not sure where I saw it but seems like 0.04" was listed as a safe number. When I did the clay on mine a couple of weeks back it was just a hair over that...if I got the measure correct ....... ? ? ? I sure hope so.
Back to top	IP Logged

sluggo Serious Thumper ModSquad Offline big singles lead, twins follow the pack Posts: 4744 moses lake washington Gender:	Re: Does anybody know about squish Reply #7 - 05/31/10 at 17:54:57 me i went to the gutter with the term squish. opps
Back to top	SINGLES RULE, HARLEYS DROOL IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home