SuzukiSavage.com - need help finding jet please....

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › need help finding jet please....

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

need help finding jet please.... (Read 88 times)

ky04savage YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 3	need help finding jet please.... 05/27/10 at 19:16:40 does anyone know where i can find jets that are bigger than the 230 main jet that i have? i still seem to be running too lean. i know that the stock main is 145 and i got a jet kit and the biggest one is a 230. does anybody make bigger than that? i thank u for all your help.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28884 L.A. California Gender:	Re: need help finding jet please.... Reply #1 - 05/27/10 at 19:18:27 if you need bigger than 165, you got problems and it's not the lack of bigger jets. what tells you that you need a bigger jet?
Back to top	Versey's Place Tech Section Index IP Logged

BurnPgh Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1732	Re: need help finding jet please.... Reply #2 - 05/27/10 at 19:20:32 what mods do you have and what jet kit did you get? Dynojet kits are sized differently. If you're got a freer flowing muffler and kn filter you'd be looking from 152.5-160 or so for a main jet but where on the throttle do you seem to be lean? low end, mid range?
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28637 Tucson Az Gender:	Re: need help finding jet please.... Reply #3 - 05/27/10 at 19:21:47 +1,... bigger than that is just a hole!... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

mikelhsr1982 Full Member Offline Who turned up the heat Posts: 150 WV Gender:	Re: need help finding jet please.... Reply #4 - 05/27/10 at 19:56:39 If I have a cone filter and straight pipe, what size jet will I need to get?
Back to top	IP Logged

earlytimz

Senior Member

Offline

Savage model 417

(4 speed, 17mm)

Posts: 382
BG, KY
Gender: male

Re: need help finding jet please....
Reply #5 - 05/28/10 at 07:09:08

mikelhsr1982 wrote on 05/27/10 at 19:56:39:

If I have a cone filter and straight pipe, what size jet will I need to get?

My guess would be a 152.5 or 155. Try the smaller one first & if you get popping (lean) above 1/4 throttle, go with the 155.
Get a hold of Lancer... He will send you a small variety that covers the spectrum. Cheap too! Don't forget to follow the procedures in the forum to set your idle mixture & needle spacing.

Ky04... Where are you located bro?

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home