SuzukiSavage.com - Dremel for bobbing

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Cafe › Dremel for bobbing

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Dremel for bobbing (Read 113 times)

Tiefighterpilot Senior Member Offline Daily Rider Posts: 346 San Francisco	Dremel for bobbing 05/23/10 at 09:55:38 Anyone use dremel for modification work on the bike? Just and cutting off fender, fabricating licence bracket, etc? Just wondering if I should fabricate stuff or buy premade kits. Kits feels like its a easier way, but also I would not have the satisfaction of saying... I made that.
Back to top	2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Dremel for bobbing Reply #1 - 05/23/10 at 10:02:50 I used a dremel to relieve the crankcases on KLX when changing the front sprocket from 15 to 16, I also made a spacer for the swap on my lathe. I do agree it's good to say "I made that". Clive W p.s. I made an insert for my silencer to quieten it some.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28787 L.A. California Gender:	Re: Dremel for bobbing Reply #2 - 05/23/10 at 10:21:22 I'll use the dremel in almost every mod, but only for the small stuff or clean up. it would take a long time to cut off a fender with it. great tool for precision work.
Back to top	Versey's Place Tech Section Index IP Logged

RidgeRunner13 Serious Thumper Offline haulin' the groceries! Posts: 649 Mustang Island, Texas Gender:	Re: Dremel for bobbing Reply #3 - 05/23/10 at 10:21:53 There is no feeling like telling someone who is admiring a part on your bike & asks "where can I buy one of those" ; You can't, I made that.
Back to top	Wind me up & watch me run, I ain't never had too much fun! IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28387 Tucson Az Gender:	Re: Dremel for bobbing Reply #4 - 05/23/10 at 10:24:34 angle grinder's way quicker... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

dasch Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1137	Re: Dremel for bobbing Reply #5 - 05/23/10 at 10:35:13 +1 on angle grinder. Get the thinnest plate you can get and have at it. Dremel is very good for precise work.
Back to top	IP Logged

mick Serious Thumper Alliance Member Offline Hell-bound Posts: 7323 Dayton Oregon Gender:	Re: Dremel for bobbing Reply #6 - 05/23/10 at 13:48:04 How about a chain saw,a big one,and a sledge hammer,and a sawsall. bobbers look like .... can you tell I am anti bobbi ?
Back to top	Science and Logic fly you to the moon, Religion makes you fly into skyscrapers IP Logged

dasch Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1137	Re: Dremel for bobbing Reply #7 - 05/23/10 at 20:03:31
Back to top	IP Logged

earlytimz

Senior Member

Offline

Savage model 417

(4 speed, 17mm)

Posts: 382
BG, KY
Gender: male

Re: Dremel for bobbing
Reply #8 - 05/23/10 at 20:59:52

Personally, I don't find many uses for the dremel. It's too small and most of the attachments just don't hold up for me. I prefer a good angle grinder, a porta-band & a die grinder.

If you have the tools and ability to make something yourself, do it. There is no satisfaction like it, plus you end up with a product that is one of a kind. Something to be proud of!!

IP Logged

Tiefighterpilot Senior Member Offline Daily Rider Posts: 346 San Francisco	Re: Dremel for bobbing Reply #9 - 05/23/10 at 21:50:09 I think I will be getting an angle grinder. Thanks for all your help.
Back to top	2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28387 Tucson Az Gender:	Re: Dremel for bobbing Reply #10 - 05/23/10 at 23:35:17 Tie,... I was sorta' kidding,... ... but I have used the angle grinder more on my bike than a dremel.. $10 or $20 bucks at Harbor Freight... depends on sales... http://www.harborfreight.com/heavy-duty-4-1-2-half-inch-angle-grinder-91223.html MORE POWER!... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

Tiefighterpilot Senior Member Offline Daily Rider Posts: 346 San Francisco	Re: Dremel for bobbing Reply #11 - 05/24/10 at 07:40:59 Sweet.
Back to top	2007 S40, KN Cone Air Filter, BCB Pipe, BCB Fender and seat, Superbrace Fork Brace with guard, 55 Pilot, 155 Main, washer mod, iridium spark plug, no afterfire, some engine breaking noise IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home