SuzukiSavage.com - Dyno...

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Dyno...

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Dyno... (Read 139 times)

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28637 Tucson Az Gender:	Dyno... 05/21/10 at 15:26:17 Gerry just got new rings and a valve grind on his 23k miles Savage... 150main/52.5 pilot w/2/3rd spacer at 2400ft... k/n filter and Supertrap w/14 baffles... Here's the dyno sheet... done after 500 mile break-in... ... 33.90 hp/ 37.42 torque
Back to top	Ludicrous Speed !... ... ... IP Logged

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: Dyno... Reply #1 - 05/21/10 at 15:31:31 I wonder why they don't start showing till almost 3500 rpm.
Back to top	william h krumpen IP Logged

thumperclone Serious Thumper Alliance Member Offline PGR rider riding with respect Posts: 6047 Grand Junction Colorado Gender:	Re: Dyno... Reply #2 - 05/21/10 at 16:12:28 bill67 wrote on 05/21/10 at 15:31:31: I wonder why they don't start showing till almost 3500 rpm. the numbers arent worth posting b4 then
Back to top	standing for those who stood for US IP Logged

Charon Serious Thumper Offline Posts: 1811 Harvard, NE Gender:	Re: Dyno... Reply #3 - 05/21/10 at 18:05:49 According to an article I read long ago, many engines will not run at wide-open throttle at lower speeds. Could be this one won't accept wide-open throttle lower than 3500 or so. If this torque curve is accurate, it does show there is no 6500 rpm rev limiter, as the curve goes up to 7000.
Back to top	Eschew obfuscation. IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28637 Tucson Az Gender:	Re: Dyno... Reply #4 - 05/21/10 at 18:30:41 no limiter on a Savage.... I'd have surely found it by now.... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: Dyno... Reply #5 - 05/21/10 at 19:02:49 My s40 will pull from 30 mph easy in high gear,that I think would be around 2350 rpm.
Back to top	william h krumpen IP Logged

Charon Serious Thumper Offline Posts: 1811 Harvard, NE Gender:	Re: Dyno... Reply #6 - 05/21/10 at 19:53:44 The standard S40 has a CV carburetor. On a CV carburetor the throttle handle and the butterfly may be wide open, but the true throttle - the slide - isn't wide open until the engine inhales enough air to open it. If the true throttle isn't wide open, it limits engine air and fuel flow, and thus torque and power.
Back to top	Eschew obfuscation. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: Dyno... Reply #7 - 05/22/10 at 07:45:37 VERY NICE NUMBERS AND A GOOD TUNING JOB. COMING FROM A DYNO THOSE ARE "REAR WHEEL" HP AND TORQUE VALUES. THAT IS ALMOST IDENTICAL TO WHAT DIAMOND JIM GOT ON THE "BLACK SHADOW" WHEN HE DYNO'D IT AFTER THE EXHAUST MODS AND CARB JET/TUNE.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home