SuzukiSavage.com - WOT lean issue and silly main jet revised

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › WOT lean issue and silly main jet revised

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

WOT lean issue and silly main jet revised (Read 199 times)

jabman Senior Member Offline Posts: 411 England Gender:	Re: WOT lean issue and silly main jet revised Reply #15 - 05/09/10 at 00:14:23 i have added some markers to my throttle grip and found that at exactly half throttle in 5th my bike does exactly 70mph (with 90 profile rear) is this good??
Back to top	93" savage, 177.5 main, 52.5 w/holes 3 turns out , middle circlip, 6" k&n round filter, Dyna muffler, TKAT brace IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10659 Oklahoma Gender:	Re: WOT lean issue and silly main jet revised Reply #16 - 05/09/10 at 00:44:23 I vote for checking the float leve first after fixing the air leaking into the exhaust.
Back to top	IP Logged

jabman Senior Member Offline Posts: 411 England Gender:	Re: WOT lean issue and silly main jet revised Reply #17 - 05/09/10 at 01:12:27 float level is adjusted to the spec in the manual with the tab just touching but not pushing in the spring loaded pin of the valve
Back to top	93" savage, 177.5 main, 52.5 w/holes 3 turns out , middle circlip, 6" k&n round filter, Dyna muffler, TKAT brace IP Logged

MMRanch

Serious Thumper

Offline

Evil flourishes if
Good Men do Nothing.

Posts: 5833
LYNCHBURG TN
Gender: male

Re: WOT lean issue and silly main jet revised
Reply #18 - 05/09/10 at 21:58:02

You can get a real float reading by put a clear tube in the drain hole at the bottom of the bowl. Then holding the tube up verticle along side the carb.

Your bike does have a breather in the box ?

Could be your bike has a "HOPPED UP" cam and needs a Whopper Jet !

I basically agree with Chief Gunner, Serowbot and Lancer about your machine sucking air somewhere... could even be in the intake manifold to head area or the vacume line feeding the pedcock ?

or the Manifold itself ?

What about the air vents not letting air in the bowl so gas CAN come out ? Wouldn't that be a quick and easy fix .

Keep us up to date and good luck

I see and feel the Holy Spirit in the world , as does anybody who has eyes to see.

IP Logged

jabman Senior Member Offline Posts: 411 England Gender:	Re: WOT lean issue and silly main jet revised Reply #19 - 05/10/10 at 00:59:41 thanks guys turns out i had 2 exhaust leaks at the header and muffler. lots of exhaust paste later and it looks fixed. ill take it for a test ride now
Back to top	93" savage, 177.5 main, 52.5 w/holes 3 turns out , middle circlip, 6" k&n round filter, Dyna muffler, TKAT brace IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home