Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Loud Click, can't shift gears
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
Loud Click, can't shift gears (Read 435 times)
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Loud Click, can't shift gears
Reply #15 -
05/07/10 at 02:06:58
the start switch I have added would sure make for a nice test here. Some day Ill post how again. Ill have to pop the seat & look at the decomp timer again.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
ESLloyd
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 20
Re: Loud Click, can't shift gears
Reply #16 -
05/07/10 at 03:54:11
Need to know what year bike is,there are differences in the way the starter circuit is wired.If you are hearing the decompressor solinoid activating there is nothing wrong with the starter switch on handlebar. What tools do you have,testlight,voltmeter??basic handtools??
Back to top
IP Logged
conlime
YaBB Newbies
Offline
Posts: 24
Chicago
Gender:
Re: Loud Click, can't shift gears
Reply #17 -
05/07/10 at 14:22:33
1986 - 8k on her
I took apart the starter switch and there was a lot of gunk and grime. Cleared that off. Now when depress the start button it at least tries to start...everytime. But still clicks like a sob when I try and start.
I'm off to get a voltometer now. If this ends up being the brand new battery I just bought...oh boy. Eslloyd I just have you're basic hand tools.
Back to top
If you keep throwing yourself into the fire you'll eventually figure out a way to not get burt.
IP Logged
dasch
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 1137
Re: Loud Click, can't shift gears
Reply #18 -
05/07/10 at 19:02:16
your decompression cable might be loose. That'll make it click a bit louder and should be harder to turnover. Just a guess.
Back to top
IP Logged
crabpainter
Full Member
Offline
Look Twice Save A
Life
Posts: 101
Kentucky
Gender:
Re: Loud Click, can't shift gears
Reply #19 -
05/07/10 at 21:32:21
Here's something you might try. While trying to crank it, TAP the starter motor with a small hammer. My thinking is maybe the brush to armature connection isn't making contact.
I still am of the mind that this is a connection issue.
I await with interest.
Back to top
Interested in pre 70's British bikes or Hodaka's.
IP Logged
mick
Serious Thumper
Alliance Member
Offline
Hell-bound
Posts: 7323
Dayton Oregon
Gender:
Re: Loud Click, can't shift gears
Reply #20 -
05/08/10 at 09:56:47
I thought I would mention the on off switch on the handlebars, it has happened, you sometimes forget to switch it on.
make sure the lead to the starter is bolted on tight,and battery terminals.
Back to top
Science and Logic fly you to the moon,
Religion makes you fly into skyscrapers
IP Logged
Routy
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2280
Winston Oregon
Gender:
Re: Loud Click, can't shift gears
Reply #21 -
05/08/10 at 21:14:28
If you installed a new battery, then we'll eliminate the battery ends of the battery cables that attach to the battery. Next I would go to the other ends of those cables,.....and clean them.
If you want to prove it is a bad connection, (don't we know it is ?) jump 12 volts direct to the started terminal. But make sure the bike is in neutral, and control the sparks by touching the terminal quickly and positively
Back to top
Rich
'07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055)
IP Logged
conlime
YaBB Newbies
Offline
Posts: 24
Chicago
Gender:
Re: Loud Click, can't shift gears
Reply #22 -
05/09/10 at 09:40:16
Tapped the starter and didn't have any results with that. I just took out the battery again. DID notice some corrosion on the battery wires. I scraped that gunk off. There wasn't a lot though. I also noticed that on the neg batt wire the corrosion has seeped into the actual wire at the head.
Is there a fix for this? or should I go buy another wire... and cut and splice?
Back to top
If you keep throwing yourself into the fire you'll eventually figure out a way to not get burt.
IP Logged
verslagen1
YaBB Moderator
ModSquad
Offline
Where there's a
will, I want to be
in it.
Posts: 28884
L.A. California
Gender:
Re: Loud Click, can't shift gears
Reply #23 -
05/09/10 at 10:12:09
Did you try what routy said?
good idea to make sure it's not the starter.
make sure it's in neutral
take any known good battery
use jumper cables
black to frame or a bolt on the engine
pull back the rubber boot on top of the starter
touch red to the bolt
don't mind the sparks
if the bike was set to run it might even start.
if it goes a little bit then stalls, it's on the compression stroke. either put it in gear and back it up till it hits the other side of the compression stroke or hit the starter button for a second to activate the decomp
Back to top
Versey's Place
Tech Section Index
IP Logged
ESLloyd
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 20
Re: Loud Click, can't shift gears
Reply #24 -
05/09/10 at 13:33:25
Put a little baking soda and water in a mid size pill bottle,shake up,then dip wire end and let it soak for 10 minutes or so.Rinse with clean water .That should clean up most of the corrosion.Shine connector up with steel wool,scotch pad or medium grit sandpaper.After reassembley spray connector with a little oil or protector.
Back to top
IP Logged
conlime
YaBB Newbies
Offline
Posts: 24
Chicago
Gender:
Re: Loud Click, can't shift gears
Reply #25 -
05/09/10 at 13:40:47
Will do...thanks
Back to top
If you keep throwing yourself into the fire you'll eventually figure out a way to not get burt.
IP Logged
Rockin_John
Serious Thumper
Alliance Member
Offline
Posts: 1562
+36° 10' , -95° 48'
Gender:
Re: Loud Click, can't shift gears
Reply #26 -
05/09/10 at 22:06:05
Bad Starter Solenoid.
Back to top
IP Logged
conlime
YaBB Newbies
Offline
Posts: 24
Chicago
Gender:
Re: Loud Click, can't shift gears
Reply #27 -
05/17/10 at 21:55:07
Well Routy I did what you said with another batt and jumper cables. Nothing happened. So I'm guessing I'll try and find a new starter online and go from there.
Back to top
If you keep throwing yourself into the fire you'll eventually figure out a way to not get burt.
IP Logged
ESLloyd
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 20
Re: Loud Click, can't shift gears
Reply #28 -
05/19/10 at 16:50:37
Brush set is quite cheap $32 at one on-line supplier.Not that hard to install.Probably 85% chance that's all it needs.I'd take starter apart and check it.
Back to top
IP Logged
bill67
Serious Thumper
Offline
old tired
Posts: 8517
genoa city wisconsin
Gender:
Re: Loud Click, can't shift gears
Reply #29 -
05/19/10 at 16:54:34
I had a starter motor rewound on one of my bikes,It work good after that and another 8000 miles when I sold it.
Back to top
william h krumpen
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/22/24 at 17:26:20
›
General Category
›
Rubber Side Down!
› Loud Click, can't shift gears
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.