SuzukiSavage.com

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › caliper

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

caliper (Read 265 times)

Horatio Hawkshaw

Ex Member

Re: caliper
Reply #15 - 05/04/10 at 13:21:11

I just had to deal with trying to get the stripped out screw out of my master cylinder- I wound up *carefully* using my Dremel with a cutoff wheel to cut a slot in the top of the screw head. I used one of the wheels I had ground down already so as to not damage the reservoir cap. Then I used a standard flat head screw driver and the offending screw came right out. A trip to Home Depot for some new screws, and everything is copacetic. Smiley

IP Logged

bill67 Serious Thumper Offline old tired Posts: 8517 genoa city wisconsin Gender:	Re: caliper Reply #16 - 05/04/10 at 13:46:44 I've always just took a big flat screw driver slit it in and turn it sideways never had to do anything else.Just turned it slow and it would open up.
Back to top	william h krumpen IP Logged

Digger

Serious Thumper
2005 No Login

Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male

Re: caliper
Reply #17 - 06/13/10 at 20:26:16

justin_o_guy2 wrote on 04/29/10 at 07:02:44:

For questions about the JIS screw heads & where to get the drivers, look in Search or, if you suck at that like I do, give Digger a holla..

I got all but one of my JIS screwdrivers here:

http://www.amessupply.com/products1.cfm?aid=1&cid=D&sid=DE&fid=1404070

Quality is good.

I got a #3 JIS screwdriver here:

http://www.mcmaster.com/#jis-(japanese-industrial-standard)-screwdrivers/=670nes

Quality is average.....but still good enough for working on a Savage.

IHTH!

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com

IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home