Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› How thick is that STOCK needle SPACER??
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
How thick is that STOCK needle SPACER?? (Read 125 times)
tomie
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 9
How thick is that STOCK needle SPACER??
04/22/10 at 05:15:09
My '86 has that occasional 'hickkup' on cruise.. its ok on accel and decell.. just hickkups on cruise at low speeds under 45.. if I go faster its good. I opened up the carb but the spacer looks to be already modded.. it measured a wee bit under 1/8". I also have a fairly open muffler.. loud with baffles..
I just wonder if it has already been shaved and if it has , I may take it out and see what happens..!!
Back to top
IP Logged
Routy
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2280
Winston Oregon
Gender:
Re: How thick is that STOCK needle SPACER??
Reply #1 -
04/22/10 at 05:59:50
As my sig shows ?? I believe mine was .110 thick, I did 1/2 at .055
Mine was surging badly at low speed cruise, 2nd & 3rd gear,.....choke on 1 notch would improved it.
After the 1/2 spacer mod, it runs perfectly in all ranges, and starts and runs w/ less choking time when cold.
Back to top
Rich
'07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055)
IP Logged
tomie
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 9
Re: How thick is that STOCK needle SPACER??
Reply #2 -
04/22/10 at 08:27:47
wow thanks for the fast reply.. i've been searching on here but couldn't find a benchmark ..mine is stock and will be 1/2 by tonite... appreciate it ... tom
Back to top
IP Logged
Mr. Hyde
Serious Thumper
Alliance Member
Offline
SuzukiSavage.com
Rocks!
Posts: 565
Kingston, Ontario, Canada
Gender:
Re: How thick is that STOCK needle SPACER??
Reply #3 -
04/22/10 at 08:54:53
Not my image but in my S40 info. collection.
Back to top
FREE RIDER - Whatever blows your hair back.
IP Logged
tomie
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 9
Re: How thick is that STOCK needle SPACER??
Reply #4 -
04/22/10 at 12:17:41
that's great Mr. Hyde.. it is comforting to say the least that my spacer is stock or at least close to stock.. I remember thinking that it was a tad less than 1/8" (.110"??) but definitely NOT in the .050 range!!!!
Thanks guys!!
Back to top
IP Logged
Routy
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 2280
Winston Oregon
Gender:
Re: How thick is that STOCK needle SPACER??
Reply #5 -
04/22/10 at 13:02:09
Proves one thing, close tollerences wasn't hi on the list of priorities of the carb mfg.
Or, different spacers for different areas of the country ??
Back to top
Rich
'07 S40 Blvd stocker, except drilled OEM exhaust and white spacer mod...1/2 (.055)
IP Logged
tomie
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 9
Re: How thick is that STOCK needle SPACER??
Reply #6 -
04/22/10 at 17:20:11
you gotta wonder what effect fuel would have on it too... swelling or shrinkage??? I'll post my thickness when i get it out.. tonite i had to work on other things.. but in the morning she's coming apart.. again!
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/29/24 at 06:29:22
›
General Category
›
Rubber Side Down!
› How thick is that STOCK needle SPACER??
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.